Raw Material:
Steel 34CrMo4 EN 10083 part 1 & 3 with restrictions in accordance with ISO 9809-1 par.6
Mechanical Properties: (After Quenching & Tempering)
| Rmg | Reg | A | KV |
| Mpa | Mpa | % | J at -50°C |
AC030 | 650-1099 | 480 | 14 | 35 |
AC040 | 1000-1099 | 860 | 14 | 35 |
AC055 | 1000-1099 | 860 | 14 | 35 |
Chemical Composition:
%C | %Mn | %Si | %Mo | %Cr | %S | %P | %P+S |
0.30-0.37 | 0.6 - 0.9 | 0.1 - 0.4 | 0.15 - 0.3 | 1 - 1.2 | ≤ 0.01 | ≤ 0.02 | ≤ 0.025 |
Rough material to be supplied by Approved Manufacturers.
Size range:
AC030 | Water Capacity (Liter) | 80 | 100 | 120 | 140 | 150 | 180 | 200 | 220 |
Nominal Weight (Kg) | 70 | 80 | 90 | 100 | 105 | 123 | 135 | 150 |
Nominal Length (mm) | 790 | 965 | 1145 | 1290 | 1380 | 1650 | 1830 | 2010 |
AC040 | Water Capacity (Liter) | 35 | 40 | 50 | 67.5 | 70 | 80 | 90 | 100 |
Nominal Weight (Kg) | 35 | 38 | 46 | 57 | 60 | 67 | 73 | 80 |
Nominal Length (mm) | 800 | 895 | 1090 | 1440 | 1480 | 1675 | 1870 | 2060 |
AC055 | Water Capacity (Liter) | 35 | 40 | 50 | 67.5 | 70 | 80 | 90 | 100 |
Nominal Weight (Kg) | 35 | 38 | 46 | 56 | 59 | 65 | 70 | 75 |
Nominal Length (mm) | 800 | 895 | 1090 | 1440 | 1480 | 1675 | 1870 | 2060 |
No. FAB057822XT/001
Enclosure - Page 2 of 2
Cylinders for compressed, liquefied and mixed gases
Service condition:
Medium : Compressed gases & gas mixtures
| AC030 | AC040 | AC055 |
Working Pressure (bar) | 64 | 200 | 167 |
Hydrostatic Test Pressure (bar) | 98 | 300 | 250 |
Service Temprature (°C) | -52 / 65 | -50 / 65 | -50 / 65 |
Survey conditions: The bottles are to be in compliance in all respects with the requirements specified in Part C, Ch 1, Sec 3 and Part D, Ch 4, Sec 2 of the RINA Rules and are to be tested accordingly.
(For dimensions / properties other then mentioned above bottles are to be evaluated on case by case basis.)
Technical Documentation:
Approved Drawings: ISMC6925 (AC030), ISMC6926 (AC040), ISMC6927 (AC055)
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.