Documenti di riferimento / Reference documents:
- Pratica n° RS/2024/CS/01/3104 / Job nr. RS/2024/CS/01/3104
Descrizione Prodotto:
- Portelli stagni in alluminio: dimensioni lato cerniere da 550 a 1200 mm, lato orizzontale da 550 a 1060 mm.
- Vedere disegno approvato con n° DIP/140868.
- Se vengono impiegati gli stessi materiali, come da disegno approvato, l'omologazione può essere considerata valida per tutte le dimensioni così descritte: lato corto compreso tra 550 e 1060 mm e lato lungo compreso tra 550 e 1200 mm.
- Dopo l'installazione a bordo, deve essere eseguita prova di spingardatura.
- L'omologazione è riferita alla sola "tenuta stagna a battente".
- Portelli idonei per un battente di pressione idraulica pari a 3.5 m.
- Portelli installati su percorsi di sfuggita dovranno essere apribili da entrambi i lati (le maniglie dovranno esser permanentemente fissate) senza l'uso di chiavi od altri utensili.
Product Description:
- Watertight aluminium hatches: dimensions hinged side from 550 to 1200 mm, horizontal side from 550 to 1060 mm.
- See drawing approved with nr. DIP/140868.
- If the same construction materials, as per approved a.m. drawings, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 550 and 1060 mm and long side between 550 and 1200 mm.
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness".
- Hatches suitable for an hydraulic pressure of 3.5 m head.
- Hatches fitted on escape ways are to be openable by both sides (handles are to be permanently fixed) without the use of keys or other tools.
Campo di applicazione:
- Portelli stagni a battente per "RINA Rules for the Classification of Yachts".
Fields of application:
- Watertight hatches for "RINA Rules for the Classification of Yachts".