MED236525PUENG- -  -  N-  NB-12, NB-16, NB-19 -N- S- S- -18/05/2026- Marine Equipment- - SN- S- - N-  - 528,755B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED236525PU- N-May 18, 2031528755
 
Form
  Marine Equipment(TO)
Certification N. MED236525PU - (ENG)
Certificate date 18/05/2026
Type Protezione antincendio
Product Dual-purpose type nozzles (spray/jet type): (a) Hand-held branch pipes for fire service use - Combination branch pipes PN 16
Item Nº MED/3.55a

Model or Denomin.
Items
NB-12, NB-16, NB-19
Applicant NAVUTEC CO., LTD.
Place of requester 91-6, Sandan 3-ro, Jeonggwan-eup, Gijang-gun  %  46027 Busan  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 51 728 5055, +82 51 728 5054, ---
Directive (EU) 2025/1533
Standards EN 15182-1:2019, EN 15182-2:2019.
Reference Documents SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Expire date 18/05/2031
Responsible Office RINA Korea Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jin Young Kim S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED236525PU

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.55a
Description Dual-purpose type nozzles (spray/jet type): (a) Hand-held branch pipes for fire service use - Combination branch pipes PN 16
Type NB-12, NB-16, NB-19
Applicant NAVUTEC CO., LTD.
91-6, Sandan 3-ro, Jeonggwan-eup, Gijang-gun,46027 Busan,REPUBLIC OF KOREA
Testing standards EN 15182-1:2019, EN 15182-2:2019.
Reference standards SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in RINA Korea Marine on
This Certificate is valid until
May 19, 2026
May 18, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Jin Young Kim
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED236525PU
Page 1 of 3

Product Description


"NB-12, NB-16, NB-19" are combination branchpipes with adjustable pattern at variable flow (Type 1). The hand-held branchpipes are comprised of a fitting system, a rotating operating element and a nozzle.

Type
NB-12
NB-16
NB-19
Material
Body: Bronze
Nozzle head: NBR / Nozzle tip: Bronze
Maximum working pressure (bar)
16
Standard working pressure (bar)
6
Type of spray
Full cone
Flow rate at straight jet at 6 bar (L/min) *
317
384
398
Effective throw at 6 bar (m) *
32
33
34
Flow rate at wide spray jet at 6 bar (L/min) *
564
574
577
Maximum angle of wide spray jet (°) *
118
118
118
Weight (Kg) *
1.6
Note
*: Data based on test report: PUFP-8543








ATTACHMENT TO
CERTIFICATE No. MED236525PU
Page 2 of 3
Technical Documentation
  • Technical drawings and Manual, filed by RINA listed on Letter No. PUFP/2026/215/YK008.

Tests Carried Out
  • Test report (Ref. No. NVT-23-1106-100), witnessed by DNV dated on 06-11-2023, filed by RINA with No. PUFP-8542.
  • Test report of heat & frost test (Ref. No. TBK-2023-007099), issued by Korea Testing & Research Institute dated on 12-09-2023, filed by RINA with No. PUFP-8541.
  • Test report (Ref. No. NVT-MED-DPN-260330-1), witnessed by RINA dated on 24-03-2026, filed by RINA with No. PUFP-8543.

Application/Limitation
  • Approved as dual-purpose type nozzles (spray/jet type) to be used in conjunction with hoses for fire fighting purposes on board ships.
  • Each branchpipe shall be delivered with an instruction and maintenance handbook according to clause 8.1 of EN 15182-1.

Note
  • None.




ATTACHMENT TO
CERTIFICATE No. MED236525PU
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Jin Young Kim
**** NOTICE: This is NOT an official certificate ****