MED370023CS!002ENGD- -  -  N- SOMEC FRP W 024 -N- S- S- -18/10/2023- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED370023CS/002- N-Oct 9, 2028162855
 
Form
  Marine Equipment(TO)
Certification N. MED370023CS/002 - (ENG)
Certificate date 18/10/2023
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
SOMEC FRP W 024
Applicant SOMEC SRL
Place of requester VIA PALÙ 30 ZONA INDUSTRIALE  %  31020 ZOPPE' DI SAN VENDEMIANO (TV)  % ITALY
Tel. N.,Fax, Email 0438471904, 0438471806, info@somecgroup.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 16/10/2022
Expire date 09/10/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED370023CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type SOMEC FRP W 024
Applicant SOMEC SRL
VIA PALÙ 30 ZONA INDUSTRIALE,31020 ZOPPE' DI SAN VENDEMIANO (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 17, 2023
October 9, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED370023CS/002
Page 1 of 2

Product description

Window having maximum overall clear size of 2200x1600 mm (WxH). The glass compound type CONTRAFLAM MARINE A60 (manufacturer Vetrotech), symmetric and having total thickness of 31 mm, is composed of 4 glasses and 3 layers of intumescing gel. The frame is composed of a steel flat having thickness of 5 mm and width of 80 mm fillet welded to the bulkhead on both sides, of a square pipe, 4 mm thick and dimensions of 40x40 mm welded to the flat and of a stainless steel profile type JANSEN JANISOL, 1.5 mm thick and having dimensions of 50x70 mm fixed to the square pipe by means of M6 screws. The glass retaining frames, fitted on both sides, are composed of a stainless steel profiles having thickness of 1.5 mm and dimensions of 20x25 mm, fixed to the frame by means of M5 screws. The square pipe is insulated with one layer of product named FIREGUARD, 12.7 mm thick and having density of 900 kg/m3 and, on the side exposed to the fire, by means of two layers of mineral wool type PAROC MARINE FIRE SLAB having density of 100 kg/m3 and thicknesses of 30 and 60 mm. Between the square pipe and the frame a gasket type KERAFIX 2000 MONOADHESIVE having thickness of 5 mm and width of 50 mm, is fitted. Between the glass faces and the glass retaining frames, gaskets type KERAFIX 2000 MONOADHESIVE, 5 mm thick, are fitted; between the glass edges and the frame, on the lower side, spacers of calcium silicate type FIRESIL, 6 mm thick, are fitted. The glass panes are sealed by means of silicone type PENSIL 300.
Field of application
Fire resistant A-60 Class window with fire hazard on the inner side of the application.
Reference documents
SOMEC drawing No. CM0108-M01-TD-0001 dated 25 July 2018 approved on 3 September 2018 with endorsement No. LABS-1694.
Tests carried out
Tests as per RINA Test Laboratory report No. 2018CS012230/1 issued on 10 October 2018 according to IMO 2010 FTP Code Part. 3 - Appendix 2 - A.I.




ATTACHMENT TO
CERTIFICATE No. MED370023CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****