FAB168324VE!001ENG- -  -  N- Carbon, Carbon-Manganese, Low-Alloy, Alloy and Stainless steel (Martensitic, Austenitic, Duplex) in ingots up to 135 ton and continuous casting slab up to 40ton. -N- S- S- -12/12/2024- Fabbricanti Approvati- - NN- N- - S-  - 155,010BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB168324VE/001- N-Dec 11, 2029155010
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB168324VE/001 - (ENG)
Certificate date 12/12/2024
Type Approvazione di fabbricanti di materiali
Product Lingotti di carbomnio, basso legati, acciaio inox

Model or Denomin.
Items
Carbon, Carbon-Manganese, Low-Alloy, Alloy and Stainless steel (Martensitic, Austenitic, Duplex) in ingots up to 135 ton and continuous casting slab up to 40ton.
Applicant NLMK VERONA S.P.A.
Place of requester VIA A. SALIERI 22  %  37050 Oppeano (VR)  % ITALY
Tel. N.,Fax, Email +39 0456997933, 0456997915, ---
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents -
Expire date 11/12/2029
Responsible Office RINA Venice Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB168324VE/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Ingot Castings of Carbon, Low Alloy and Stainless Steel
Type Carbon, Carbon-Manganese, Low-Alloy, Alloy and Stainless steel (Martensitic,
Austenitic, Duplex) in ingots up to 135 ton and continuous casting slab up to
40ton.

Reference standards RINA Rules for the approval of manufacturers of materials
Reference documents -
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until December 11, 2029
_________________________________
RINA Services S.p.A.
Massimo Muzzi
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB168324VE/001
Enclosure - Page 1 of 1
Carbon, Carbon-Manganese, Low-Alloy, Alloy and Stainless steel (Martensitic, Austenitic, Duplex) in Round, Polygonal, Square, Slab ingots from 4,5 ton to 135 ton,continuous casting slab up to 40t.

APPROVAL CONDITIONS



INGOTS (all types and grades)
-Round: from 4,5 ton to 135,0 ton
-Polygonal: from 5,0 ton to 80,0 ton
-Square: from 7,0 ton to 30,0 ton
-Slab: from 12,0 ton to 60,0 ton

CONTINUOUS CASTING SLABS (all types and grades)
-up to 40,0 ton
























General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Venice Marine December 2, 2024
**** NOTICE: This is NOT an official certificate ****