MED144823CSENGD- -  -  N- EI-MIST Fire extinguishing systems for protection of galley extract ducts -N- S- S- -22/05/2023- Marine Equipment- - SN- S- - N-  - 491,066B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED144823CS- N-May 21, 2028491066
 
Form
  Marine Equipment(TO)
Certification N. MED144823CS - (ENG)
Certificate date 22/05/2023
Type Protezione antincendio
Product Galley Exhaust Duct Fixed Fire Extinguishing Systems components
Item Nº MED/3.68

Model or Denomin.
Items
EI-MIST Fire extinguishing systems for protection of galley extract ducts
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
Place of requester VIA MARIO NATALUCCI 6  %  60131 Ancona (AN)  % ITALY
Tel. N.,Fax, Email 3453666651, +39 071 2865099, fabrizio.raffaeli@valvitalia-fire.com
Directive (EU) 2022/1157
Standards ISO 15371: 2015
Reference Documents SOLAS 74 Reg. II-2/9.
Request 04/12/2023
Expire date 21/05/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED144823CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.68
Description Galley Exhaust Duct Fixed Fire Extinguishing Systems components
Type EI-MIST Fire extinguishing systems for protection of galley extract ducts
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
VIA MARIO NATALUCCI 6,60131 Ancona (AN),ITALY
Testing standards ISO 15371: 2015
Reference standards SOLAS 74 Reg. II-2/9.
Issued in Genoa on
This Certificate is valid until
May 22, 2023
May 21, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED144823CS
Page 1 of 3
Product description
High pressure water mist system composed of water pumps, stainless steel pipes, strainer, section valves, nozzles, control and monitoring systems, or self contained system designed in accordance with the "Principal requirements of the System", IMO Res.A.800(19) as amended or IMO MSC/Circ.1165 or IMO MSC.1/Circ.1387 as amended.


Main components
Nozzle typeEI-FOG 2Ixx0.815
Extinguishing mediaFresh water /sea water
System activation Manual/ Automatic
Pipe and fitting Stainless steel high pressure type
Pump unit supply ( typical)Voltage: 3x400V - Frequency: 50-60 Hz
Working pressure: 120 bar
Cylinder unit supply ( typical)
Nozzle quantity
Water quantity
Nitrogen quantity
2
20.5 lt
27 lt
3
30.8 lt
40 lt
4
41.1 lt
80 lt
5
51.3 lt
80 lt
Field of application

Local protection for galley extract duct on conventional ships.








ATTACHMENT TO
CERTIFICATE Nr. MED144823CS
Page 2 of 3

Nozzle installation requirements




Projection Downwards
Maximum distance from each nozzle 6500 mm
K factor 0.88
Minimum working pressure100 bar
Maximum duct free sectional area 0.57 m2

Reference Documents

  • Technical system drawings, 6482MA15/MA16/MD17/MD18 filed by RINA with n° CSST-2827.
  • Technical specification "Eusebi Impianti Water Mist System for protection of galley ducts" filed by RINA with n° CSST-2829.
  • Fire Extinguishing System for protection of Galley extract duct ,"Use and Maintenance Manual" issued by Eusebi Impianti and filed by RINA with n° CSST-2830
  • Fire Extinguishing System for protection of Galley extract duct , "Mechanical datasheet" issued by Eusebi Impianti and filed by RINA with n° CSST-2831.


Test carried out
Test Report "Eusebi Impianti EI-MIST system with EI Fog nozzle for kitchen ducts", n° 172/C, issued by Laboratorio TESI S.r.l. and filed by RINA with n° CSST-15931.
This certificate annuls and replaces the certificate No. MED093118CS/002 dated 04/06/2018.




ATTACHMENT TO
CERTIFICATE No. MED144823CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****