MED434624WSENG- -  -  N- XGard Bright -N- S- S- -06/05/2025- Marine Equipment- - SN- S- - N-  - 2,328,190B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED434624WS- N-May 6, 20302328190
 
Form
  Marine Equipment(TO)
Certification N. MED434624WS - (ENG)
Certificate date 06/05/2025
Description
Fixed oxygen analysis and gas detection equipment,(a) category 4 - safe area,(b) category 3 - explosive gas atmospheres
Type Protezione antincendio
Product Fixed oxygen analysis and gas detection equipment: (a) category 4 - safe area,Fixed oxygen analysis and gas detection equipment: (b) category 3 - explosive gas atmospheres
Item Nº MED/3.54a,MED/3.54b

Model or Denomin.
Items
XGard Bright
Applicant CROWCON DETECTION INSTRUMENTS (BEIJING) LTD.
Place of requester Floor 3, Building 7, No. 156, 4th Jinghai Rd, BDA  %  101111 Beijing (Beijing)  % CHINA
Tel. N.,Fax, Email 010 67870335, Echo.xue@crowcon.com, ---
Directive (EU) 2024/1975
Standards EN 50104:2019, EN IEC 60079-0:2018 incl. AC:2020, EN 60079-29-1:2016, IEC 60092-504:2016, IEC 60533:2015, for combined O2/HC systems, additionally: IMO MSC.1/Circ. 1370.
Reference Documents SOLAS Reg. II-2/4, SOLAS Reg. VI/3, IMO Res. MSC.98(73)-(FSS Code) 15. For combined O2/HC systems additionally: IMO MSC.1/Circ.1370.
Expire date 06/05/2030
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED434624WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.54a,MED/3.54b
Description Fixed oxygen analysis and gas detection equipment,(a) category 4 - safe area,(b) category 3 - explosive gas atmospheres
Type XGard Bright
Applicant CROWCON DETECTION INSTRUMENTS (BEIJING) LTD.
Floor 3, Building 7, No. 156, 4th Jinghai Rd, BDA,101111 Beijing (Beijing),CHINA
Testing standards EN 50104:2019, EN IEC 60079-0:2018 incl. AC:2020, EN 60079-29-1:2016, IEC 60092-504:2016, IEC 60533:2015, for combined O2/HC systems, additionally: IMO MSC.1/Circ. 1370.
Reference standards SOLAS Reg. II-2/4, SOLAS Reg. VI/3, IMO Res. MSC.98(73)-(FSS Code) 15. For combined O2/HC systems additionally: IMO MSC.1/Circ.1370.
Issued in SHANGHAI on
This Certificate is valid until
May 7, 2025
May 6, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED434624WS
Page 1 of 3
1. Product Description

XGard Bright is a versatile gas detector for monitoring a wide range of flammable gas (by means of infrared gas sensor technology) and oxygen (by means of electrochemical gas sensor technology). XGard Bright incorporates a bright OLED (organic light emitting diode) display and a magnetic wand for easy menu operation. It provides analogue 4-20mA and RS-485 Modbus signals as standard, with optional HART interface. Relays are also fitted for activating local alarms or sending digital signals to control systems.

Type: XGard Bright

Power source: DC 24V

Operating temperature: -40°C~+70°C

Degree of protection of enclosure: IP65 (without weatherproof cap); IP66 (with weatherproof cap)

Software Version: V0.2M

Ex-Certification: ATEX and IECEx


Ex Il 2G Ex db IIC T6 Gb
Ex Il 2D Ex tb IIIC T80°C Db









 



ATTACHMENT TO
CERTIFICATE No. MED434624WS
Page 2 of 3


2. Application/Limitation

Ex certification is not covered by this certificate, Applications in hazardous areas are to be approved in each case according to the Rules and Conditions for Safe Use specified in a valid Ex-Certificate issued by a Notified or Recognized Certification Body.

3. Design Assessment

The design assessment is based on SOLAS Reg. II-2/4, SOLAS Reg. VI/3, IMO Res. MSC.98(73)-(FSS Code)15. For combined O2/HC systems additionally: IMO MSC.1/Circ.1370.

4. Tests Carried Out

The test report, including environment test, EMC test and performance test, complies with EN 50104:2019, EN IEC 60079-0:2018 incl. AC:2020, EN 60079-29-1:2016, IEC 60092-504:2016, and IEC 60533:2015. For combined O2/HC systems,additionally: IMO MSC.1/Circ. 1370. The relevant tests were conducted using methane (CH4), oxygen (O2), and methanol (CH3OH) as test gases. This reports are filed by RINA with drawing No.: SHEL - 23739.



Inspection report (Date on 2024, August 22) edit by "CROWCON DETECTION INSTRUMENTS (BEIJING) LTD. " and witnessed by RINA Surveyor. Filed by RINA with drawing No.:SHEL-23737.

5. Reference Documents
Analysis and assessment of risk, Filed by RINA with drawing No. SHEL-23736.
European Representative Authorization Letter. Filed by RINA with drawing No.SHEL-23730.
Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-23735.

Technical drawings and manuals approved and filed by RINA listed on Approval letter No.: SHEL/2025/410/ZHITA.

6. Marking of Product

The product is to be indelibly marked with name and address of the manufacturer, type designation, batch or serial number or other elements allowing their identification and the MED Mark of Conformity.





ATTACHMENT TO
CERTIFICATE No. MED434624WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****