MED096325CSENGBN
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo di qualità
Module: B
Certification N. MED096325CS
Certificate date
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Item Nº MED/3.18b
USCG Category N° 164.112
Model or Denomin. PBM Powder coated metal ceiling
Applicant FOSHAN PEARL BUILDING MATERIAL INDUSTRIAL CO., LTD.
Place of requester 89 YONGAN AVENUE, GUANYAO, SHISHAN TOWN, NANHAI DISTRICT Foshan (Guangdong)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2024/1975
Dati Certificato D o E
Certification N. MED382525WS
Certificate date 04/07/2025
   

Yongjun Pan S


PRODUCTION QUALITY ASSURANCE (MODULE D)
CERTIFICATE No.  MED382525WS

This is to certify that
RINA Services S.p.A. did undertake the relevant assessment procedures for the quality system of the manufacturer identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2024/1975, for the products described in the EC Type Examination Certificates (Module B) listed in the Attachment to this Certificate.
MED Item Nº MED/3.18b
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Type
Applicant FOSHAN PEARL BUILDING MATERIAL INDUSTRIAL CO., LTD.
89 YONGAN AVENUE, GUANYAO, SHISHAN TOWN, NANHAI DISTRICT Foshan (Guangdong),CHINA
Module B certificate Number  MED096325CS
Date  Jun 27, 2025 
Date   RINA (No. 0474)
    
Issued in RINA China Marine on
This Certificate is valid until
July 4, 2025
July 3, 2028

This Certificate consists of this sheet plus an attachment
This certificate, in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE of the equipment listed in the Attachment, authorises the Manufacturer or his authorised representative established within the Community to affix the "Mark of Conformity" (wheelmark) as reported below.
0474 /YY
YY Last two digits of year mark affixed
USCG Approval marking
The manufacturer is allowed to affix the U.S. Coast Guard approval number (USCG approval number:
164.112/EC0474/MED382525WS to the above equipment, as allowed by the 'Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Conformity for Marine Equipment' signed February 27th, 2004.

________________________________________
Yongjun Pan
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No. MED382525WS
Equipment:
PBM Powder coated metal ceiling
Technical documentation

____________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules
e) RINA may revoke the approval in the case of modifications to requirements or conditions for the approval
f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply.
g) This certificate loses its validity in case the EC type Examination (Module B) certificate is no more valid.
__________________________________
Yongjun Pan

**** NOTICE: This is NOT an official certificate ****