ENGGS31/05/2011
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED074211WS/001
Certificate date 5/31/11
Type Mezzi di salvataggio
Directive 2009/26/EC
Product Launching appliances using falls (davits)
Item Nº A.1/1.21
Model SA23-1
Identification S/N. 1187003; Intend for H/No. AL0818 of ZHEJIANG AOLI SHIPBUILDING CO.; LTD
Manufacturer ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Place of production BEI YANG INDUSTRIAL ZONE,SHANG PAN TOWN,LINHAI ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Place of requester BEI YANG INDUSTRIAL ZONE,SHANG PAN TOWN,LINHAI ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Standards LSA Code IMO MSC 48(66),IMO Res. MSC 81(70),IMO Res. MSC 81(70) as amended, MSC 226(82),IMO Relolution MSC.218(82),IMO Resolution MSC.216(82)
Surveyor Wei Bing Lin
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED074211WS/001

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall (davits)
Model SA23-1
Identification S/N. 1187003; Intend for H/No. AL0818 of ZHEJIANG AOLI SHIPBUILDING CO.; LTD
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
BEI YANG INDUSTRIAL ZONE,SHANG PAN TOWN,LINHAI ZHEJIANG
CHINA
Testing standards LSA Code IMO MSC 48(66),IMO Res. MSC 81(70),IMO Res. MSC 81(70) as amended, MSC 226(82),IMO Relolution MSC.218(82),IMO Resolution MSC.216(82)
    
Issued at Genoa 
on May 31, 2011

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /11
 

________________________________________
RINA - Hong Gu
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED074211WS/001
Manufacturer:
ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Address
BEI YANG INDUSTRIAL ZONE,SHANG PAN TOWN,LINHAI ZHEJIANG
CHINA

Verified components of the equipment (with serial number)
S/N. 1187003; Intend for H/No. AL0818 of ZHEJIANG AOLI SHIPBUILDING CO.; LTD
Technical documentation
The technical documentation has been approved by RINA, Drawing No.:  SHST-007022

 Equipment description:
 
- Type: SA23-1, - Serial No: 1187003.
- Maximum lowering load: 23kn;
- Maximum hoisting load: 14kn,
- Maximum slewing load: 14kn,
- Hoisting speed: ≥18m/min
- Lowering speed: 40-60m/min
- Slewing angle of electric motor: ≤330 deg
- Slewing angle of accumulator: ≤110 deg
- Steel wire dimension: 18 x 19 + FC-16mm

Limitation on the acceptance or use of the product
20° list, 10° trim
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Hong Gu
RINA
**** NOTICE: This is NOT an official certificate ****