Porcelain gres tiles reinforced, on the back, with fiberglass mat (mass per area 200 g/m2 ,thickness 0.2 mm). The fiberglass is glued to the porcelain back by means of polyurethane adhesive type Ultrabond I 725 produced by Mapei SpA, in the amount of 220 ± 5 g/m2 .
Thickness range (mm): from 3.4 to 12.3 (± 5%)
Mass per area (g/m2): from 7724 to 28924 (± 5%)
Colour: dark grey and lighter.
The material may also be produced by:
· FLORIM CERAMICHE SPA SB - Strada Statale 610 Selice, 1 40027 Mordano (BO) ITALY.
Field of application
As floor covering.
The product may be applied to any metallic support, any non-combustible support and any material having low flame spread characteristics..
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.
Tests carried out
- Tests as per RINA Test Laboratory Reports Nos. 2016CS011717/1 and 2016CS011717/2 dated 22 June 2026 issued according to IMO 2010 FTP Code Part 5.