FAB294826WSENG- -  -  N- Carbon,Carbon-Manganese & Alloyed steel forgings -N- S- S- -21/04/2026- Fabbricanti Approvati- - NN- N- - S-  - 2,382,472BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB294826WS- N-Apr 20, 20312382472
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB294826WS - (ENG)
Certificate date 21/04/2026
Type Approvazione di fabbricanti di materiali
Product Fucinati in acciaio

Model or Denomin.
Items
Carbon,Carbon-Manganese & Alloyed steel forgings
Applicant Jinan Qianrui Forging Co., Ltd.
Place of requester Fenghuangshan Industrial Park, Puji Street, Zhangqiu District,  %  250206 Jinan (Shandong)  % CHINA
Tel. N.,Fax, Email 15621872288, ---, jnqr@midasforging.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 20/04/2031
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB294826WS
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel forgings
Type Carbon,Carbon-Manganese & Alloyed steel forgings
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until April 20, 2031
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB294826WS
Enclosure - Page 1 of 1
Carbon,Carbon-Manganese & Alloyed steel forgings

APPROVAL CONDITIONS


- Manufacturing process: The products are forged from ingot produced by RINA approved
manufacturers.

- Forging type: Open Die Forging

- Steel type, max. weight and deliver condition:
Steel Forgings for Shafting and machinery

Steel type
Max. weight (kg)
Delivery condition
Carbon & carbon-manganese steel
8000
N + T
Alloy steel
8000
Q + T

Max. Size: 800mm for Max. Diameter and 10000mm for Max. Length of Shaft Type;2000mm for Max. Diameter and 1000mm for Thickness of Pie or Disk Type;1500mm for Max. Diameter and 1200mm for Thickness of Ring or Bucket Type

Steel Forgings for Hull Structure

Steel type
Max. weight (kg)
Delivery condition
Carbon & carbon-manganese steel
8000
N + T
Alloy steel
8000
Q + T

Max. Size: 800mm for Max. Diameter and 10000mm for Max. Length of Shaft Type;2000mm for Max. Diameter and 1000mm for Thickness of Pie or Disk Type;1500mm for Max. Diameter and 1200mm for Thickness of Ring or Bucket Type

Remark: N: Normalising; T: Tempering; Q: Quenching

- This certificate is not suited to Alloy Intermediate Shaft which designed tensile strength is between 800N/mm2 and 950N/mm2.
- This certificate is not suited to forgings designed for slewing rings.

Survey condition: The products are to be in compliance in all respects with the relevant RINA rules and to be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine 04/21/2026
**** NOTICE: This is NOT an official certificate ****