FAB799626WSENG
-
- -
N
-
Carbon/carbon-manganese steel
-
N
-
S
-
S
-
-
03/09/2026
-
Fabbricanti Approvati
-
-
N
N
-
N
-
-
S
- -
2,392,477
B
bis
Fabbricanti Approvati
Numero Pratica,NumDich,Norma,Schema,Richiesta,Validità
-
FAB799626WS
-
N
-
Sep 2, 2031
2392477
Print Page
Form
Fabbricanti Approvati
(
TO
)
Certification N.
FAB799626WS
- (
ENG
)
Certificate date
03/09/2026
Type
Approvazione di fabbricanti di materiali
Product
Tubi in acciaio senza saldatura
Model or Denomin.
Items
Carbon/carbon-manganese steel
Applicant
Standards
RINA Rules for the approval of manufacturers of materials
Expire date
02/09/2031
Responsible Office
RINA China Marine
Codice scelto:
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
Lingua certificato:
ENG
Sotto modulo:
Vuoto
Fase:
Querysave
Firma:
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No.
FAB799626WS
This is to certify
that the manufacture of the product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval of Manufacturers of Materials.
Description
Seamless steel pipes and tubes
Type
Carbon/carbon-manganese steel
Reference standards
RINA Rules for the approval of manufacturers of materials
.
This Certificate is valid until
September 2, 2031
_________________________________
RINA Services S.p.A.
Qiangfu Tan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No.
FAB799626WS
Enclosure - Page 1 of 1
Carbon/carbon-manganese steel
APPROVAL CONDITIONS
Size range
Cold finished: Max.Dia./thickness:406.4*41mm
Hot finished(Hot rolled): Max.Dia./thickness:133*25mm
Hot finished(thermal expansion):: Max.Dia./thickness:1016*46mm
Pipe /Tube and Fittings:
Seamless steel pipe/tube
Manufacturing process :
Seamless/Hot formed/cold formed
Heat treatment : N/Q+T
Note: 1) N: Normalising, T: Tempering;Q: Quenched
2) Steel billet is to be provided by RINA approved manufacturer;
Survey conditions:
The pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.
RINA China Marine
September 3, 2026
**** NOTICE: This is NOT an official certificate ****