FAB382823WS!001ENG- -  -  N- Carbon and Carbon-manganese and Austenitic stainless and Ferritic-austenitic (duplex) stainless -N- S- S- -30/10/2023- Fabbricanti Approvati- - SN- N- - S-  - 948,008BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB382823WS/001- N-Oct 3, 2028948008
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB382823WS/001 - (ENG)
Certificate date 30/10/2023
Type Approvazione di fabbricanti di materiali
Product Fucinati in acciaio

Model or Denomin.
Items
Carbon and Carbon-manganese and Austenitic stainless and Ferritic-austenitic (duplex) stainless
Applicant JIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD.
Place of requester No.3 Zhongnan Road Jiangyin (Jiangsu)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 03/10/2028
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB382823WS/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel forgings
Type Carbon and Carbon-manganese and Austenitic stainless and Ferritic-austenitic
(duplex) stainless

Applicant JIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD.
No.3 Zhongnan Road Jiangyin (Jiangsu)
CHINA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until October 3, 2028
_________________________________
RINA Services S.p.A.
Hong Gu
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB382823WS/001
Enclosure - Page 1 of 1
Carbon and Carbon-manganese and Austenitic stainless and Ferritic-austenitic(duplex) stainless

APPROVAL CONDITIONS


- Products description:

Steel type
Forging method 1)
Max. weight (kg)
Heat treatment condition2)
Carbon, Carbon-manganese
OD
700
N
Austenitic stainless
OD
700
SHT
Ferritic-Austenitic
OD
700
SHT
Note:
1) OD: Open die forging
2) N: Normalized ; SHT: Solution Heat Treated (Solution annealing)

Survey conditions: all forgings to be used for construction of ships classed with RINA shall meet the requirements of the RINA Rules and shall be tested accordingly.


General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine October 30, 2023
**** NOTICE: This is NOT an official certificate ****