MED418326CS!002ENG- -  -  N- Smoke and Heat detector (A1 Class):,MD9910 with TOD, Integrated Sounder and Obstruction detector,MD9910-LT with Integrated Sounder and not including TOD and Obstruction detector,MD9910-LTNB not including TOD, Integrated Sounder and Obstruction detector,In conjunction with fire detector bases:,MD9900-BS, MD9900-BSI, MD9910-LP, MD9900-BC, MD9900-BCI -N- S- S- -26/10/2026- Marine Equipment- - SN- S- - N-  - 840,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED418326CS/002- N-Oct 26, 2031840487
 
Form
  Marine Equipment(TO)
Certification N. MED418326CS/002 - (ENG)
Certificate date 26/10/2026
Type Protezione antincendio
Product Fire alarm devices - Sounders
Item Nº MED/3.53

Model
Items/Sizes
Smoke and Heat detector (A1 Class):,MD9910 with TOD, Integrated Sounder and Obstruction detector,MD9910-LT with Integrated Sounder and not including TOD and Obstruction detector,MD9910-LTNB not including TOD, Integrated Sounder and Obstruction detector,In conjunction with fire detector bases:,MD9900-BS, MD9900-BSI, MD9910-LP, MD9900-BC, MD9900-BCI
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA GRETI DEL VARA 9  %  19020 Follo (SP)  % ITALY
Tel. N.,Fax, Email 0187 599101, 0187 558983, d.dido@microdatasrl.it
Directive (EU) 2026/1434
Standard EN 54-3:2014 incl.A1:2019, IEC 60092-504:2016, IEC 60533:2015.
Reference Documents SOLAS 74 Reg. II-2/7,SOLAS 74 Reg. X/3,IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC code) 7,IMO Res. MSC.98(73)-(FSS Code) 9,IMO Res. MSC391(95)-(IGF Code) 11,IMO MSC.1/Circ 1242,RINA Rules for the certification of Marine Equipment
Validity 26/10/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Luigi Benedetti S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED418326CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/3.53
Description Fire alarm devices - Sounders
Type Smoke and Heat detector (A1 Class):
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
VIA GRETI DEL VARA 9,19020 Follo (SP),ITALY
Testing standards EN 54-3:2014 incl.A1:2019, IEC 60092-504:2016, IEC 60533:2015.
Reference standards SOLAS 74 Reg. II-2/7; SOLAS 74 Reg. X/3; IMO Res. MSC.36(63)-(1994 HSC Code) 7; IMO Res. MSC.97(73)-(2000 HSC code) 7; IMO Res. MSC.98(73)-(FSS Code) 9; IMO Res. MSC391(95)-(IGF Code) 11; IMO MSC.1/Circ 1242; RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 26, 2026
October 26, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED418326CS/002
Page 1 of 4
Alternative Manufacturer
UNIPOS LTD

Alternative Place of Manufacturer
47 SAN STEFANO STR
5800 PLEVEN Pleven
BULGARIA


Product information:
Product:
Combined Smoke and Heat detector (MD9910, MD9910-LT, MD9910-LTNB)

Description

MD9910 automatic analogue addressable multi-criteria combined Smoke and Heat Detector suitable for indoor installation.
The detector MD9910 is provided with a new feature named TOD (test on demand) that runs a test procedure on a command received by the Control Unit.
The TOD checks the following circuits:

- Functionality of the IR detection chain: The functionality of the smoke measurement is fully tested. The test result is transmitted to the control panel.
- Functionality of the built in Sounder: The sound pressure level generated by the Sounder is monitored to verify the correct acoustic level. The test result is transmitted to the control panel
- Functionality of the Alarm LEDs: The correct functionality of the alarm LEDs is verified. The test result is transmitted to the control panel.
- Functionality of the temperature detector: The temperature circuit is tested by forcing a thermal alarm. The test result is transmitted to the control panel.
- Functionality detecting obstructions in front of the detector: Sensor enclosure protection is detected as well as any obstacles nearby the sensor preventing the passage of smoke. The test result is transmitted to the control panel.

Note:
It can be assumed that the T.O.D. test procedure provides diagnostic results comparable with the ones obtained by manual test simulation performed locally by the operator.
The MD9910 detector can also be supplied without the TOD (Test On Demand) functionality in two versions that differ in the presence (MD9910-LT) and absence (MD9910-LTNB) of the integrated sounder.


Rating and main characteristics:

Protection Index with base MD9910-LP IP22
Protection Index with base MD9900-BS/BSI IP44
Sounder type Type A
Sound Max output 81dB(A)@1mt
Sound nominal output 75dB(A)@1mt
Frequency 2400 Hz
Weight (detector only) 125 gr
Weight (with LP base) 180 gr
Weight (with BS/BSI base) 280 gr
Material Polycarbonate Flame Retarded CI. UL94V0
Colour White RAL9010
Operating Temperature - 25°C / +75°C
Power Supply 24Vdc (modulated)
Max Current 350 uA
Max Current with Sounder on 550 uA

MD 9910 heat detector according to Class A1 according to EN 54-5:2017

Detector main features:

- provide fire alarm for smoke presence
- provide fire alarm for high temperature
- survey the temperature inside the room where it is installed
- transmit to central Unit the analogue values of temperature and smoke that it measures
- perform, on demand, a test procedure named TOD (Test On Demand)
- notify the alarm state by the activation of the built-in Sounder
- notify the alarm by activation of two high intensity LEDs visible at 360° by means of light guides
- detect the presence of an obstruction that inhibits the revealing of the smoke

The MD9910-LT and MD9910-LTNB versions are derived from the standard MD9910 sensor, from which they differ due to the absence of certain electronic circuits that are not required for the Test On Demand (TOD) function.

Datasheet:

D38823_J - Datasheet detector MD9910
ST38822_F - Technical Specification MD9910 (23.04.2025)
D44604_A - Technical assessment MD9910-LT & MD9910_LTNB (24.04.2025)









Microdata Due Reference documents:
Document No. Revision Description
ST38822
F
Detector Technical specification
D38823
K
Sensor Data sheet
D40019
0
Risk Assessment
SDD MD9910
1.1
Software_Firmware Guide
SDD-39929
1
Software description doc. SWMD9910
CRISD-39930
1
Computer Resource Integrated Support
VDD SW-29741
1
Version Description Doc. SW-29741 rev.1
IS40015
A
MD9910 Inspection and functional test
D36618
C
Detector Bases Short-Circuit Isolator_ Functional test procedure
IS39982
0
Smoke Detector- Dust pollution test
ST39940
B
Low Profile Detector Base – MD9910-LP Technical Specification
D39924
D
Data sheet LP detector base
CM-29685-40007
0
Dwg. MD9910-LP Assembly
CM-29685-40010
0
Dwg. MD9910-LP Outline
CM-29655-40006
0
Dwg. MD9910 dimension with bases
CM-29655-40007
B
Dwg. MD9910 detector assembly
CM-29655-40010
0
Dwg. MD9910 detector Outline
ME-29737
E
Dwg. MD9910 ID Label
ME-29806
A
Dwg. MD9910-LP- ID Label
19268/09/S
-
Certificate ISO 9001:2015 (13/02/2024) - Microdata Due
bg004315
-
Certificate ISO 9001:2015 - Unipos

EVPU a.s. Test Reports:
No. 0-0381E/1/19 (Emission test and Immunity test performed according to the standards: IEC 60092-504:2017 and IEC 60533:2015; Date: 4/12/2019)
No. 0-0381E/19 (EN 54-3:2014+A1:2019; Date: 4/12/2019)
No. 0-0381B/19 (EN 54-3:2014+A1:2019; Date: 4/12/2019)

EVPU a.s. Statement:
Doc. n. Ny-013/20 (10/03/2019)

The documents above mentioned have been archived in the Leonardo Draw Plus portal under the project: https://leodrawplus.rina.org/projects/83478/detail




ATTACHMENT TO
CERTIFICATE No. MED418326CS/002
Pages 4 of 4
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****