|
RCD II - (Modulo H) |
|
BIL |
|
Dettaglio |
|
|
|
|
 |
ATTESTATO DI VALUTAZIONE SISTEMA QUALITA' TOTALE
FULL QUALITY ASSESSMENT DECISIONN. DIP135626XA
|
Si certifica, in qualità di organismo notificato (n° 0474), che il sistema qualità della seguente Azienda è stato verificato in accordo ai requisiti previsti dalla Direttiva 2013/53/UE ed è risultato conforme a tali requisiti.
We certify, as notified body (no. 0474), that the quality system of the following Company has been examined in accordance with the prescriptions of Directive 2013/53/EU and has been found in compliance with the applicable essential safety requirements.
|
| Descrizione |
SERBATOI DEL COMBUSTIBILE |
| Description |
FUEL TANKS |
| Tipo |
PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| Type |
|
| Norme di riferimento |
Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione. |
| Reference standards |
European Directive 2013/53/EU - Rules for EC certification of recreational craft and their components, personal watercraft, noise emissions from recreational craft and exhaust emissions from propulsion engines. |
|
|
|
|
|
|
|
|
|
|
|
In base agli Articoli 16, 17 e 18 della Direttiva 2013/53/UE, la presente certificazione (Modulo H), consente al Fabbricante di apporre su ogni prodotto sopradescritto la seguente marcatura.
|
On the basis of Articles 16, 17 and 18 of Directive 2013/53/EU, this certificate (Module H), allows the Manufacturer to affix the following marking to each product described above.
|
|
0474
|
|
|
_________________________________
RINA Services S.p.A.
|
| |
Alberto Carmagnani
|
| |
| Rilasciato a Genova il 29 Luglio 2026.
Questo Certificato è valido fino al 28 Luglio 2029 |
| |
| Issued in Genova on July 29, 2026. This Certificate is valid until July 28, 2029 |
| |
|
|
|
|
|
|
|
|
Termini e condizioni di validità/Terms and validity
conditions
- Il presente certificato potrà perdere validità nel
caso siano apportate modifiche al prodotto rispetto
alla documentazione tecnica esaminata.
- The following condition may render this
certificate invalid: any technical modification to
the product as regards examined technical
documentation
|
Termini e condizioni di validità
La responsabilità del prodotto rimane del
fabbricante, del suo rappresentante o, in assenza di
un rappresentante, dell'importatore, in accordo con
la Direttiva 2001/95/EC relativa alla Sicurezza
Generale dei Prodotti. Le seguenti condizioni
possono rendere non valido il presente <Computed
Value>: modifiche nella realizzazione del
prodotto, rispetto alla documentazione tecnica
esaminata modifiche o emendamenti alla Direttiva
modifiche o emendamenti negli standard che
costituiscono la base per la conformità documentale
con i requisiti essenziali della Direttiva.
|
Terms and validity conditions
The product liability rests with the manufacturer, his
representative or, in the absence of a representative,
the importer, in accordance with the General Product
Safety Directive 2001/95/EC The following conditions may
render this <Computed Value> invalid: Changes in
construction of the product as regards the examined
technical file Changes or amendaments to the Directive
Changes or amendaments in the standards with form basis
for documenting compliance with the essential
requirements of the Directive. |
|
**** NOTICE: This is NOT an official certificate **** |
|
|