ENGGS03/08/2009
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED116609SH/001
Certificate date 8/3/09
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi per la messa a mare dotati di paranchi e verricelli
Item Nº A.1/1.21
Model 21KN
Identification 0939028
Manufacturer ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Place of production BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Place of requester BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED116609SH/001

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall and winch (davits)
Model 21KN
Identification 0939028
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
    
Issued at Genoa 
on August 3, 2009

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /09
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED116609SH/001
Manufacturer:
ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Address
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA

Verified components of the equipment (with serial number)
0939028
Technical documentation
Test report issued by RINA on October 27, 2008 ( n. 0939028 in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code.

Approved drawing:
 STRT-5534           21KN SINGLE ARM ROTARY BOAT/RAFT DAVIT
 
Product description:
Maximum lowering load: 21kn
Hoisting load: 14kn.
Slewing load: 14kn
Hoisting speed: ≥18m/min
Lowering speed: 40~60m/min


                                            ATTACHMENT TO

                                CERTIFICATE No. MED116409SH/001

Slewing Radius: 4.2 meter
Slewing angle of electric motor: ≤330 deg
Slewing angle of accumulator: ≤110 deg
Steel wire dimension: 18 x 19 + FC-16
Hydraulic system working pressure: 14 Mpa

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****