FAB089226PUENG
-
- -
N
-
Grade A - AH32 - AH36
-
N
-
S
-
S
-
-
28/04/2026
-
Fabbricanti Approvati
-
-
N
N
-
N
-
-
S
- -
563,134
B
bis
Fabbricanti Approvati
Numero Pratica,NumDich,Norma,Schema,Richiesta,Validità
-
FAB089226PU
-
N
-
May 23, 2031
563134
Print Page
Form
Fabbricanti Approvati
(
TO
)
Certification N.
FAB089226PU
- (
ENG
)
Certificate date
28/04/2026
Type
Approvazione di fabbricanti di materiali
Product
Profilati da scafo in acciaio ordinario e ad elevata resistenza
Model or Denomin.
Items
Grade A - AH32 - AH36
Applicant
Standards
RINA Rules for the approval of manufacturers of materials
Expire date
23/05/2031
Responsible Office
BUSAN
Codice scelto:
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
Lingua certificato:
ENG
Sotto modulo:
Vuoto
Fase:
Querysave
Firma:
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No.
FAB089226PU
This is to certify
that the manufacture of the product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval of Manufacturers of Materials.
Description
Normal strength and higher strength hull steel sections
Type
Grade A - AH32 - AH36
Reference standards
RINA Rules for the approval of manufacturers of materials
.
This Certificate is valid until
May 23, 2031
_________________________________
RINA Services S.p.A.
Jong Min Lee
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No.
FAB089226PU
Enclosure - Page 1 of 1
Grade A - AH32 - AH36
APPROVAL CONDITIONS
Steel making process:
billet supplied from approved manufacturers, continuous
casting
Deoxidation practice, condition of supply and thickness:
Steel grades
Deoxidation practice and fine grained elements
Condition of supply and max. thickness
A
Si killed
As rolled - section : 15 mm
flat bar : 30 mm
AH32 - AH36
Si killed / Al + V
As rolled - section : 15 mm
flat bar : 30 mm
Survey conditions:
the products are to be in compliance in all respects with the relevant RINA rules and are to be tested accordingly
General conditions for the approval
The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.
BUSAN
April 28, 2026
**** NOTICE: This is NOT an official certificate ****