Low-smoke, halogen-free cables, suitable for environments where toxic and corrosive fumes must be limited in the event of a fire. Suitable for power transmission, control circuit and instrumentation connections (POWER). Suitable for signaling and telecommunications of fire safety devices on board (CONTROL). Fire-resistant (FR) and water-spray-resistant (WSR) for fixed electrical installations. Unshielded and (OS/A) shielded against electromagnetic interference.
Properties of the cables:
- HF = Halogen Free
- IS = Individual shield on each pair or triplet
- OS = Total shield for all groups of conductors
- A = Armoured
- FR = Fire resistant
- WSR = Water spray or water jets resistant
ICM CONTROL IS OS A FR WSR:
Conductor:
Stranded wire, plain or tinned copper, cl.2 covered with fireproof mica tape
Insulation:
Cross-linked polyethylene XLPE compound, halogen free, low emission of smoke, toxic and corrosive gases when exposed to fire
Stranding:
Core laid-up together in pairs/triplets
Individual screen:
Aluminium/polyester tape with tinned copper drain wire
Overall screen:
Aluminium/polyester tape with tinned copper drain wire
Armour:
Plain or tinned annealed copper wires braid.
Sheath:
Halogen free thermoplastic compound SHF1
Marking:
ICEL MARINE ICM CONTROL IS OS A FR WSR cross nominal section mm2 150/250V IEC 60092-376 IEC 60332-3-22 ... production date Made in Italy (BG) CE RoHS progressive meter marking.
ICM POWER A FR WSR:
Conductor:
Stranded wire, plain or tinned copper. Covered with fireproof mica tape (class 2 ≤ 10 mm2; class 5 ≥ 16 mm2)
Insulation:
Cross-linked polyethylene XLPE compound, halogen free, low emission of smoke, toxic and corrosive gases when exposed to fire
Inner sheath (if any):
Halogen free compound or synthetic tape
Armour:
Plain or tinned annealed copper wire braid
Sheath:
Halogen free thermoplastic compound SHF1
Marking:
ICEL MARINE ICM POWER A FR WSR cross nominal section mm2 0,6/1kV IEC 60092-353 IEC 60332-3-22 ... production date Made in Italy CE RoHS progressive meter marking
Temperatures:
- Min installation temperature -5°C
- Min. operating temperature -40°C - Max operating temperature on the conductor 90°C
- Max short-circuit temperature 250°C
Documentation:
- HF 1000 A 1x300 mm2 (Test reports: CN25-0114334-01; 0846/DC/REA/25; 1156/DC/REA/25)
- HF 1000 A FR 30x1 mm2 (Test reports: CN25-0114334-02; 1156/DC/REA/52_2)
- HF 250 IS OS A FR 2x2x1.5 mm2 (Test reports: CN25-0114334-03; 1156/DC/REA/52_3)
- HF 250 OS FR WSR 1x2x1.5 mm2 (Test reports: CN25-0114334-04; 0846/DC/REA/25_4; 1156/DC/REA/25_4)
- HF 250 IS OS A FR WSR 37x2x0.75mm2 (Test reports: CN25-0114334-05; 0846/DC/REA/25_5; 1156/DC/REA/25_5)
Secondary production site: Corso America 31/A - 24040, Zingonia (BG) |
|