Product description:
The S7-1500 Technoloy CPUs:
Type | Order no. | Designation |
| S7-1500 | 6ES7 511-1TK01-0AB0 | CPU 1511T-1 PN |
| 6ES7 511-1TL03-0AB0 | CPU 1511T-1 PN |
| 6ES7 511-1UK01-0AB0 | CPU 1511TF-1 PN |
| 6ES7 511-1UL03-0AB0 | CPU 1511TF-1 PN |
| 6ES7 515-2TM01-0AB0 | CPU 1515T-2 PN |
| 6ES7 515-2TN03-0AB0 | CPU 1515T-2 PN |
| 6ES7 515-2UM01-0AB0 | CPU 1515TF-2 PN |
| 6ES7 517-3UQ10-0AB0 | CPU 1517TF-3 PN |
| 6ES7 517-3TQ10-0AB0 | CPU 1517T-3 PN |
| 6ES7 516-3UP10-0AB0 | CPU 1516TF-3 PN |
| 6ES7 516-3TP10-0AB0 | CPU 1516T-3 PN |
| 6ES7 518-3UT10-0AB0 | CPU 1518TF-3 PN |
| 6ES7 518-TT10-0AB0 | CPU 1518T-3 PN |
| 6ES7 515-2UN03-0AB0 | CPU 1515TF-2 PN |
| 6ES7 516-3TN00-0AB0 | CPU 1516T-3 PN/DP |
| 6ES7 516-3UN00-0AB0 | CPU 1516TF-3 PN/DP |
| 6ES7 517-3TP00-0AB0 | CPU 1517T-3 PN/DP |
| 6ES7 517-3UP00-0AB0 | CPU 1517TF-3 PN/DP |
| 6ES7 518-4TP00-0AB0 | CPU 1518T-4 PN/DP |
| 6ES7 518-4UP00-0AB0 | CPU 1518TF-4 PN/DP |
| ET200SP | 6ES7 514-2VN03-0AB0 | CPU 1514SP T-2 PN |
| 6ES7 514-2WN03-0AB0 | CPU 1514SP TF-2 PN |
Power supply: 24V DC
Degree of protection: IP20
Documents:
- et200sp,cpu,1514spt,2,pn,manual,en-US;
- s71500,et200mp,manual,collection,en-US;
Test reports:
- SIMATIC Type Test - 2016-03, dated 2016-07-29
- SIMATIC Type Test - 2021-08, dated 2021-05-17
- SIMATIC Type Test - 2023-05, dated 2023-04-05
- SIMATIC Type Test - 2025-S008, dated 23.01.2025
- TÜV Report: Z10_067803_0020, dated 14.09.2023
- SN101344C-A6, rev. 1.3.1, dated 2024-12-10
TYPE APPROVAL CERTIFICATE |
No. ELE046625XG |
Enclosure - Page 2 of 2 |
SIMATIC S7-1500 Technology CPU |
Remarks:
- The products fulfill EC Code: 31.
- The equipment fulfils the EMC requirements for installation on Bridge and Deck Zone by using a filter on power supply
lines, order no.: B84113-C or equivalent with ratings C=2x 0.47µF + 2x 4700pF, L=4x 4.7mH is used.
- The Manufacturer's installation recommendation described above regarding surge protection is to be considered.
- Only Hardware and Firmware successfully tested together in compliance with the regulations as referred to in page one,
according to the declaration of the manufacturer is covered by this certificate.
- Depending on the Application, Factory Acceptance and On-board Tests are to be performed in accordance with
requirements for Category II or III Equipment. |
|