MED055222XT!001ENG- -  -  N- B15 Class Wall Panel (Aluminium - 50 mm) -N- S- S- -01/08/2022- Marine Equipment- - SN- S- - N-  - 1,083,701B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED055222XT/001- N-Aug 1, 20271083701
 
Form
  Marine Equipment(TO)
Certification N. MED055222XT/001 - (ENG)
Certificate date 01/08/2022
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b

Model or Denomin.
Items
B15 Class Wall Panel (Aluminium - 50 mm)
Applicant MERCAN PANEL ÜRETIM SAN. VE TIC. A.S.
Place of requester ÇERKESLI OSB MAH., IMES BULVARI, No.11 DILOVASI Kocaeli  % TURKEY
Tel. N.,Fax, Email +90 262 502 0180, +90 262 502 0182, info@mercanpanel.com
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - Part. 3
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Expire date 01/08/2027
Responsible Office RINA Turkey Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Volkan Celik S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED055222XT/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.11b
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type B15 Class Wall Panel (Aluminium - 50 mm)
Applicant MERCAN PANEL ÜRETIM SAN. VE TIC. A.S.
ÇERKESLI OSB MAH., IMES BULVARI, No.11 DILOVASI Kocaeli,TURKEY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - Part. 3
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in RINA Turkey Marine on
This Certificate is valid until
August 1, 2022
August 1, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Volkan Celik
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED055222XT/001
Page 1 of 2
Product description MRN-LWP-M8;
Bulkhead consisting of panels having maximum width of 540 mm each, maximum height of 2500 mm and total thickness of 50 mm. Each panel is composed of an external aluminium sheet, 0.6 mm thick, and a mineral wool layer with 48 mm thick and having density of 150 kg/m3 type Rock Wool - Izocam Marine SLAB150 glued to the aluminium sheet by means of 250 g/m2 of adhesive type polyurathane based - Sika Force - 7710 L100. The bulkhead is fitted, on the perimeter, with U shaped galvanized steel profiles at top and bottom (54x60x1,5mm in above and 54x25x1,5mm in below), U shaped aluminium profiles (54x25x0.6mm) at sides containment profiles pup rivet to the aluminium sheets. The panel joints consist of C-clip painted aluminium joint profile, and having dimensions of 13x10x0,6 mm to the bent edges of the bulkhead aluminium sheets.

Field of application
Fire resistant B-15 Class bulkhead with accessories for general application.
Due to the fact that this B class bulkhead has been tested from only one side and has been designed to be installed with the untested side adjacent to the untested side of another B class bulkhead, this EC type-examination certificate is valid only if these conditions are respected when installed on board ensuring that the level of protection indicated in the relevant fire integrity tables included in SOLAS Chapter II-2/Reg.9.2 Thermal and Structural Boundaries is always fulfilled.
Reference documents
B15 ALUMINIUM WALL PANEL drawings No. MRN-LWP-M8 Rev. 0 dated 02.03.2022 approved on 18.05.2022 with endorsement No. ISFP 3132.
Tests carried out
Tests as per Efectis Era Avrasya Test ve Belgelendirme laboratory test report No. RFTR21158 issued on 30.08.2021 according to IMO Res. MSC.307(88)-(2010 FTP Code), as amended.

Application/Limitation: This product is evaluated as wall panel. Use in High Speed Crafts is not allowed.

Marking of product: The product is tbe marked with name of manufacturer, type designation and fire technical rating.




ATTACHMENT TO
CERTIFICATE No. MED055222XT/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Volkan Celik
**** NOTICE: This is NOT an official certificate ****