MED345724CS!001ENGD- -  -  N- B15 glazed hinged door single leaf - B15DHG1 -N- S- S- -29/07/2024- Marine Equipment- - SN- S- - N-  - 597,421B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED345724CS/001- N-Jul 28, 2029597421
 
Form
  Marine Equipment(TO)
Certification N. MED345724CS/001 - (ENG)
Certificate date 29/07/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16

Model
Items/Sizes
B15 glazed hinged door single leaf - B15DHG1
Applicant BLU BUD SRL
Place of requester VIA CORSICA 21/20  %  16128 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108601379, 0108183053, info@blubud.it
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 22/07/2024
Validity 28/07/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED345724CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
Description Fire doors
Type B15 glazed hinged door single leaf - B15DHG1
Applicant BLU BUD SRL
VIA CORSICA 21/20,16128 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 29, 2024
July 28, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED345724CS/001
Page 1 of 2

Product description

Single leaf glazed hinged door with maximum clear light of 1200 x 2300 mm (WxH). The leaf, having maximum dimensions of 1620 x 2313 (WxH) contains a glass compound, type PYROBEL 16 EI 30 (manufacturer AGC), having total thickness of 17.3 mm and composed of three panes and, in between, two layers of thermo-expanding gel. The door frame and the glass frame, having thickness of 1.5 mm, are composed of hollow steel profiles type FORSTER EI30; the glass retaining frames, fitted on both sides, are composed of steel profiles, 1.2 mm thick and having dimensions of 20x20 mm. The glass pane is held in place by means of ceramic fiber gaskets having thickness of 4 mm and width of 15 mm.

Field of application
Fire resistant B-15 Class single leaf hinged door for general application in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
Reference documents
BLU BUD drawing No. B15DHG1 rev. 2 dated 22 July 2014 approved on 29 July 2014 with endorsement No. LABS-939.
Tests carried out
Test as per RINA Test Laboratory report No. 2014CS01809/2 issued on 29 July 2014 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED345724CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****