MED116523CSENGF- -  -  N- LAMINATO CESAPLAST H.P.L. F.R. -N- S- S- -15/05/2023- Marine Equipment- - SN- S- - N-  - 1,057,663B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED116523CS- N-May 14, 20281057663
 
Form
  Marine Equipment(TO)
Certification N. MED116523CS - (ENG)
Certificate date 15/05/2023
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Item Nº MED/3.18a
USCG Category N° 164.112

Model or Denomin.
Items
LAMINATO CESAPLAST H.P.L. F.R.
Applicant CESAPLAST SPA
Place of requester VIA MATTEOTTI 1  %  20811 Cesano Maderno (MB)  % ITALY
Tel. N.,Fax, Email +39 0362 504701, 0362/524263, ---
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 27/03/2023
Expire date 14/05/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED116523CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.18a
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Type LAMINATO CESAPLAST H.P.L. F.R.
Applicant CESAPLAST SPA
VIA MATTEOTTI 1,20811 Cesano Maderno (MB),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
May 15, 2023
May 14, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED116523CS
Page 1 of 2

Product description



Plastic laminate composed of one decorative paper sheet impregnated with melamininc resin and Kraft paper sheets impregnated with phenolic resin, glued to a galvanized steel sheet, 0.8 mm thick, by means of 160 g/m2 double-sided adhesive tape named “Nastro biadesivo trasparente” (manufacturer TESA type 4965).
  • Mass per area (g/m2) 1287 ± 10%
  • Thickness (mm) 0,9 ± 10%


Field of application

As finishing material for all exposed surfaces.

Tests carried out
Tests as per RINA Test Laboratory reports No. 2018CS01362/1, No. 2018CS01362/2, No. 2018CS01362/3 and No. 2018CS01362/4 dated 9 May 2018 issued according to:
  • IMO 2010 FTP Code Part 5
  • IMO 2010 FTP Code Part 2
  • ISO 1716: 2010




ATTACHMENT TO
CERTIFICATE No. MED116523CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****