Fire-fighters outfit — lifeline (Type: DXNHS), is designed as below:
- Lifeline consists of steel wire (6 x 19, core 4.2 ~ 5 mm), of minimum 30 meters in length, with a strength of 3.5 KN for 5 min without failure;
- It is equipped with a snap-hook at each side.
Material specification:
- Wire: 304 Stainless Steel; - Hear Wire Harness: 1Cr18Ni9Ti; - Snap-hook: 1Cr18Ni9Ti
Technical Documentation
- Bill of Material issued by Dingxiang Marine Equipment Co., Ltd and approved by RINA with No.: SHFP-16224;
- Specification issued by Dingxiang Marine Equipment Co., Ltd and approved by RINA with No.: SHFP-16225;
- Technical Drawing issued by Jiangsu Dingxiang Marine Equipment Co., Ltd and approved by RINA with No.: SHFP-16226;
- Nameplate issued by Jiangsu Dingxiang Marine Equipment Co., Ltd and approved by RINA with No.: SHFP-16228.Tests Carried Out
- The required static load test of 3.5 KN for 5 min as per IMO Resolution MSC.98(73) Chapter 3.2.1.3 (FSS Code) was carried out under the supervision of RINA, the Test Report was filed by RINA with No.: SHFP-16227.
- Additional Test as per ISO 23269-2:2011 was carried out under the supervision of RINA, the Test Report was filed by RINA with No.: SHFP-24230.
Note: Material of fireman safety line (304 stainless steel) is considered as non-combustible as specified in IMO Res. MSC.61(67)-FTP Code, Annex 2, Part 1.
Application / Limitation
Approved for use as fireproof lifelines for fire-fighter´s outfit used in connection with a self-contained breathing apparatus approved under item MED/3.7 and item MED/7.1.
Each lifeline is to be supplied with its instructions for use, inspection and on-board maintenance complying with Regulations stated on the front page of this certificate. These instructions are to be kept on board.
Note
This certificate annuls and replaces the certificate No. MED258523WS/004 due to Change EU Authorised Representative.