DIP010008ME!001BIL- -  -  N- ABACUS 70 -N- S- S- -09/09/2008- Diporto- - NIT-ABA BB009 G8 08S- N- - N-  - 559,906BDiportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP010008ME/001- N-559906
 
Form
  Diporto(TO)
Certification N. DIP010008ME/001 - (BIL)
Certificate date 09/09/2008
Description
UNITA' DA DIPORTO
Product IMBARCAZIONI A MOTORE

Model
Items/Sizes
ABACUS 70
Applicant ABACUS MARINE S.P.A.
Place of requester VIA Z.I.R. DIRAMAZIONE VIARIA E -   98040 GIAMMORO (ME)  ITALY
Tel. N.,Fax, Email 090-9384339, 090-9385509, ---
Directive 94/25/EC as amended by Directive 2003/44/EC
Standard a - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione (NC/C.65 - ed. 01/01/2007)
Head Office MESSINA
D6 (emendamento) (modulo F) BIL
Vuoto Querysave
CERTIFICATO CE DI VERIFICA DEL PRODOTTO
CE PRODUCT VERIFICATION CERTIFICATEN. DIP010008ME/001
Si certifica, quale organismo notificato (n. 0474) che la seguente unità da diporto è stata verificata in accordo all'Allegato X (modulo F) della Direttiva 94/25/CE, come emendata dalla Direttiva 2003/44/CE, ed è risultata conforme ai requisiti essenziali di sicurezza applicabili.
We certify, as a  notified body (no 0474), that the following pleasure craft has  been examined in accordance to Annex X (module F) of the Directive 94/25/CE, as amended by Directive 2003/44/CE, and found in compliance with the applicable essential safety requirements

Descrizione UNITA' DA DIPORTO
Description PLEASURE CRAFT
Denominazione ABACUS 70
Identification
C.I.N. IT-ABA BB009 G8 08
Norme di riferimento a - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione (NC/C.65 - ed. 01/01/2007)
Reference standards a - Rules for EC certification of recreational craft and their components, personal watercraft, noise emissions from recreational craft and exhaust emissions from propulsion engines (NC/C.65 - ed. 01/01/2007)
Documenti di riferimento Certificato di esame CE del tipo n.DIP125306/MERilasciato il05/04/2007.
Reference documents EC type examination certificate no.DIP125306/MEissued on05/04/2007Rapporto delle verifiche effettuate n.2008/ME/01/100Report of tests carried out no.2008/ME/01/100
In base all'Articolo 10 della Direttiva 94/25/CE, come emendata dalla Direttiva 2003/44/CE, la presente certificazione consente al Fabbricante di apporre sul prodotto sopradescritto la seguente marcatura.
On the basis of Art.  10 of Directive 94/25/CE, as amended by Directive 2003/44/CE, this Certificate allows the Manufacturer to affix the following marking to the product described above.
0474
_________________________________
RINA
  
Michele Sanfilippo
Rilasciato a  MESSINA   il  9  Settembre  2008
   .   
Issued in MESSINA on September 9, 2008
 



Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO CE DI VERIFICA DEL PRODOTTO
CE PRODUCT VERIFICATION CERTIFICATE
DIP010008ME/001
ABACUS 70


 21/06/2008 
 
**** NOTICE: This is NOT an official certificate ****