MED415724CS!002ENG- -  -  N- Fire Sliding Door Control System -N- S- S- -11/11/2024- Marine Equipment- - SN- S- - N-  - 598,013B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED415724CS/002- N-Nov 10, 2029598013
 
Form
  Marine Equipment(TO)
Certification N. MED415724CS/002 - (ENG)
Certificate date 11/11/2024
Type Protezione antincendio
Product Componenti dei sistemi di comando delle porte tagliafuoco
Item Nº MED/3.17
USCG Category N° 164.146

Model or Denomin.
Items
Fire Sliding Door Control System
Applicant NANJING JINGYUN SHIP FITTINGS CO.,LTD
Place of requester SHIP ACCESSORY INDUSTRY PARK,JINGQIAO TOWN,LISHUI COUNTRY Nanjing  % CHINA
Tel. N.,Fax, Email 18936865198, +86 25 57401338, lsjyship@163.COM
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents SOLAS 74 Reg.II-2/9, SOLAS 74 Reg.X/3, IMO Res.MSC 97(73)-(2000 HSC Code)7.
Request 20/09/2024
Expire date 10/11/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED415724CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.17
USCG Category Nº 164.146
Description Fire door control systems components
Type Fire Sliding Door Control System
Applicant NANJING JINGYUN SHIP FITTINGS CO.,LTD
SHIP ACCESSORY INDUSTRY PARK,JINGQIAO TOWN,LISHUI COUNTRY Nanjing,CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards SOLAS 74 Reg.II-2/9, SOLAS 74 Reg.X/3, IMO Res.MSC 97(73)-(2000 HSC Code)7.
Issued in Genoa on
This Certificate is valid until
November 11, 2024
November 10, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED415724CS/002
Page 1 of 2

Product description



The fire door control system shall include a typical sliding door arrangement connected to the closing system mechanism. The closing mechanism was activated by the hydraulic device, and the power supply consisted of the electric pump and a spare hand hydraulic pump.
The clear opening size of the model sliding door was 1200 mm (W) and 2000 mm (H). The door frame was 380 kg and the door leaf was 505 kg.
The parts of door control system on the exposed face were protected with two layers of ceramic wool type TG-II produced by Yixing Marine Insulation Material Factory having thickness of 20 mm each and nominal density of 170 kg/m3.
Field of application
Fire door control system for sliding doors having maximum leaf weight of 505 kg.

Reference documents
Nanjing Jingyun Ship Fittings CO. LTD drawing No.262JY01-009-BZ-01

Tests carried out
Test as per FEFTC Far East Fire Testing Centre report No. FT13161 issued on 05 July 2013 according to APPENDIX 1 of IMO 2010 FTPC Part 4.




ATTACHMENT TO
CERTIFICATE No. MED415724CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****