- Seamless pipes and tubes in carbon and carbon-manganese steel as follow:
- Grades 320HA; 360HA; 360HB; 410HB; 410HD; 460HB; 460HD (as per RINA Rules, PtD, Ch2,
Sec2)
- Maximum outside diameter 250 mm
- Maximum wall thickness 60 mm
- Seamless pipes and tubes in low alloy steel as follow:
- Grades 0.3Mo; 0.5Cr0.5Mo; 1Cr0.5Mo; 2.25Cr1Mo; 0.5Cr0.5Mo0.25V (as per RINA Rules, PtD,
Ch2, Sec2)
- Maximum outside diameter 168 mm
- Maximum wall thickness 27 mm
- Manufacturing process : Cold rolled and Hot rolled;
- Delivery condition : Normalizing;
- Survey conditions: The pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.
- Remarks: Including automatic non-destructive testing UT and ET in lieu of hydraulic testing according
with relevant piping standard.
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.
|
|