ELE139223XPENG- -  -  N- Multifunction Monitoring System (MMS) -N- S- S- -10/10/2023- Prodotti Elettrici- - SN- N- Jaroslaw Kondracki- N-  - 1,185,771Jaroslaw KondrackiBProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE139223XP- N-Oct 9, 20281185771
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE139223XP - (ENG)
Certificate date 10/10/2023
Type Impianti di Automazione
Product Sistema di comando, e monitoraggio

Model or Denomin.
Items
Multifunction Monitoring System (MMS)
Applicant Danelec Norway AS
Place of requester Åsamyrane 88B, N-5116 ULSET, Bergen, NORWAY  %  5116 Bergen  % NORWAY
Tel. N.,Fax, Email +47 55 53 00 14, ---, invoicekyma@danelec.com
Standards Rules for the classification of ships.- Part C - Machinery, systems and fire protection. - Ch.3, Sect. 6, Table 1.
Expire date 09/10/2028
Head Office GDAŃSK
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE139223XP
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Monitoring and control system
Type Kyma Shaft Power Meter & Shapoli

Applicant Danelec Norway AS
Ã…samyrane 88B, N-5116 ULSET, Bergen, NORWAY
5116 Bergen
NORWAY
Reference standards Rules for the classification of ships.- Part C - Machinery, systems and fire protection. - Ch.3, Sect. 6, Table 1.
  

 
 
   .   This Certificate is valid until October 9, 2028
_________________________________
RINA Services S.p.A.
Jaroslaw Kondracki
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE139223XP
Enclosure - Page 1 of 2
Kyma Shaft Power Meter & Shapoli
Product description:
The Kyma Shaft Power Meter & Shapoli is a system for continuous monitoring of vessel performance data. The system can be adapted to various vessel types and machinery configurations and is flexible regarding the number and type of signal inputs.

The system consists of following parts:

Shaft Power Sensor (SPS-100)
The SPS measures torque, thrust(optional), power and revolutions on a rotating shaft.
Torque and thrust are measured with strain gauges.
The SPS consists of a Ring Unit clamped around the shaft, a Stationary Unit located next to the
shaft and a Junction Box for signal and power connection. The shaft ring contains electronic
components for signal processing and transmission and will also serve as protection for the
strain gauges which are glued to the shaft surface.

Kyma Display Unit (KDU-220.1) in ECR
The KDU can be flush mounted in, or bracket mounted on top of, a console. The KDU is a
touch panel PC.

Terminal strip (TS-1) in ECR
The Kyma Terminal strip TS-1 provides 12 VDC for the KDU in the ECR and the Stationary Unit
and connects the serial cables from the Stationary Unit to the KDU in ECR.

Kyma ShaPoLi Display Unit (KDU-220.2) in Wheelhouse
The KDU can be flush mounted in, or bracket mounted on top of, a console. The KDU is a
touch panel PC with a touch screen.

Shapoli Module
This module consists of a software option installed in the KDU and an audio and visual alarm in
the form of a buzzer (ABB Buzzer) installed next to the KDU.
In case the EEXI limited power is exceeded, the module provides continuous recording and
processing of the following input variables:
- Shaft RPM, torque, and power,
- Time and date,
- All alarm acknowledgement(s) by the operator.

Terminal Strip (TS-2) in Wheelhouse
The Kyma Terminal strip TS-2 provides 24 VDC for the KDU in the WH, and connects the KDU to
various signal.

Serial Output


NMEA-0183 default on Com 4
MODBUS - optional on Com 4

Weidmuller Power Supply
DIN Rail Power Supplies with the following types:
- PRO MAX 480W 24V 20A, PRO MAX 480W 48V 10A, PRO MAX3 480W 24V 20A,
- PRO MAX 960W 24V 40A, PRO MAX 960W 48V 20A, PRO MAX3 960W 24V 40A,
- PRO MAX3 240W, 24V 10A, PRO MAX 240W 24V 10A, PRO MAX 240W 48V 5A,
- PRO MAX 180W 24V 7.5A,
- PRO MAX3 120W 24V 5A, PRO MAX 120W 12V 10A, PRO MAX 120W 24V 5A,
- PRO MAX 70W 5V 14A, PRO MAX 72W 12V 6A, PRO MAX 72W 24V 3A.

TYPE APPROVAL CERTIFICATE
No. ELE139223XP
Enclosure - Page 2 of 2
Kyma Shaft Power Meter & Shapoli



Documents:
- Instruction Manual for Kyma Delfini.
- Kyma ShaPoLi Model KSH-N1 Shaft Power Meter with 2 displays Final Documents.
- QA Procedure Marine Performance Software Development.
- QA Procedure Marine Performance Release Management.
- QA Procedure Marine Performance Version Control System.
- QA Procedure Marine Performance Monitoring Build System.
- QA Procedure Marine Performance Issue Tracking System.

Test reports:
- Applica Technical Report Kyma AS Type Testing of Shaft Power Meter no.: 30492.
- SHaPoLi IACS EEXI compliance test specification for production.
- SHaPoLi IACS EEXI compliance test specification.
- Applica Technical Report Kyma AS EMC Testing of LCD Display with filter report no.: 31127.
- Applica Technical Report Kyma AS EMC Testing of Siemens LOGO PLC report no.: 31144.


Remarks:
- In case of major software modification detailed information and suitable documents are to be submitted to the Society.
- This certificate cancels and replaces certificate no.: ELE139422XP

GDAŃSK October 10, 2023
**** NOTICE: This is NOT an official certificate ****