MED292624WSENGD- -  -  N- CQYBII-275N -N- S- S- -06/09/2024- Marine Equipment- - SN- S- - N-  - 1,154,215B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED292624WS- N-Sep 5, 20291154215
 
Form
  Marine Equipment(TO)
MED237624WS
Certification N. MED292624WS - (ENG)
Certificate date 06/09/2024
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
CQYBII-275N
Applicant Jiangsu Baizhou Safety Technology Co., Ltd.
Place of requester No.666, Marine Equipment Industrial Park, Xinjie Town Dongtai (Jiangsu)  % CHINA
Tel. N.,Fax, Email +86 21 85758666, +86 18551500678, 505155111@qq.com, dl@jsbaizhouco.cn
Directive (EU) 2024/1975
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22,SOLAS 74 Reg.III/34,IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I,IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.481(102), IMO MSC.1/Circ.1470, IMO MSC.1/Circ.1628 Rev.1.
Request 2024/04/24
Expire date 05/09/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED292624WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.4
Description Life jackets
Type CQYBII-275N
Applicant Jiangsu Baizhou Safety Technology Co., Ltd.
No.666, Marine Equipment Industrial Park, Xinjie Town Dongtai (Jiangsu),CHINA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22,SOLAS 74 Reg.III/34,IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I,IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.481(102), IMO MSC.1/Circ.1470, IMO MSC.1/Circ.1628 Rev.1.
Issued in SHANGHAI on
This Certificate is valid until
September 6, 2024
September 5, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED292624WS
Page 1 of 3

Main Characteristics


The Inflatable lifejackets (Type: CQYBII-275N) are designed for adult with the following characteristics:
  • Minimum Buoyancy: 275N, buoyance lost after 24 hours : ≤5%;
  • Number of Inflatable Chambers: 2;
  • Time of inflation inshape: ≤ 5s;
  • With the following main components:
  • Components
    Type
    Manufacturer
    Lifejacket
    Cover Fabric
    300D*300D DTY
    Suzhou Mingwei Water Life Saving Equipment Co., Ltd.
    Inflatable Chamber Material
    210D Single-side 134T
    Zhejiang Kangjia Plastic Products Co., Ltd.
    Trigger Device
    (Inflation system)
    Automatic / Manual Inflation: MK5 (UML-5)
    Ocean Signal Ltd.
    Plastic Air Nozzle
    BZTUBE-1
    Jiangyin Henghu New Material Co.,Ltd.
    Copper Alloy Nozzle
    -
    CO2 Gas Cylinder
    60 g
    Nantong Shangcheng Metal Technology Co., Ltd.
    Lifejacket Light
    YYYD
    Jiangsu Dingxiang Marine Equipment Co., Ltd.
    Whistle
    RH/O
    Yuyao City Ditang Village Ronghua Plastic Factory
    Retro-reflective Tape Material
    II Type
    Zhejiang Longyou Daoming Optics & Chemical Co., Ltd.
Application/Limitation of Use

The adult lifejacket is approved for persons with a weight of 43 Kg or more and for a height of 155 cm or more.

The lifejacket is designed to fit person weighing up to 140 Kg and with a chest girth of up to 1750 mm.

The lifejackets can be equipped with different position indicating lights and Retro-Reflective materials EC Type Approved in compliance with Directive 2014/90/EU as amended.








ATTACHMENT TO
CERTIFICATE No. MED292624WS
Page 2 of 3

Continued:
Design Assessment

The design assessment is based on IMO Res. MSC 48(66) as amended by IMO Res. MSC 207(81), IMO Res.MSC.218(82), IMO Res.MSC.368(93) and IMO Res. MSC.481(102).

Production Testing shall be carried out according to IMO Res. MSC 81(70), part 2 as amended.


Reference Documents

Technical Drawings and Manuals edited by Jiangsu Baizhou Safety Technology Co.,Ltd and approved and filed by RINA as following:
  • Operation and Maintenance Manual, filled with RINA No.: SHFP-27202;
  • Product Specification, approved with RINA No.: SHFP-27203;
  • Technical Drawing of Inflatable Lifejacket, approved with RINA No.: SHFP-27204;
  • Component List, approved with RINA No.: SHFP-27211.
Tests Carried Out

Tests Carried Out in accordance with Revised Recommendation on Testing of Life-Saving Appliances, IMO Res. MSC.81(70), Part 1, including IMO Res. MSC.200(80), IMO Res. MSC.226(82), IMO Res. MSC.323(89) and IMO Res. MSC.378(93) as below:
  • RTD Test Report on Serial Number SN37 for Inflatable Lifejackets carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on 26/09/2023, and filled with RINA No.: SHFP-27205;
  • Evaluation and Test Report (Ref No.: 2023141) for Inflatable Lifejacket carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on 15/08/2023~03/11/2023, and filled with RINA No.: SHFP-27209.

Test Reports for Inflatable Lifejackets materials and components:
  • Test Report (Ref. No.: 2010060) for Buckle/Plastic, filled with RINA No. SHFP-27217;
  • Test Report (Ref. No.: 2019114) for Fabric, filled with RINA No. SHFP-27218;
  • Test Report (Ref. No.: 2022253) for Sewing Thread, filled with RINA No. SHFP-27219;
  • Test Report (Ref. No.: 2022252) for Structural Webbing, filled with RINA No. SHFP-27220;
  • Test Report (Ref. No.: 2012163) for Wistles, filled with RINA No. SHFP-27221.

Certificate of Conformity for CO2 Gas Cylinders:
  • Certificate of Conformity for CO2 Gas Cylinders (60g) (Ref No.: SCC(18)-5093A), filled with RINA No.: SHFP-22846.
Marking of Product

The product is to be indelibly marked with name of manufacturer, type designation and date of manufacture. The marking shall comply with the LSA Code (IMO Res. MSC.48(66)), item 1.2.2.9 and 2.2.1.2.




ATTACHMENT TO
CERTIFICATE No. MED292624WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****