MED482225CSENGD- -  -  N- GDMP-L120-1 -N- S- S- -09/12/2025- Marine Equipment- - SN- S- - N-  - 25,861B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED482225CS- N-Dec 8, 203025861
 
Form
  Marine Equipment(TO)
Certification N. MED482225CS - (ENG)
Certificate date 09/12/2025
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
GDMP-L120-1
Applicant TECNIMPIANTI S.P.A.
Place of requester STRADA CONSORTILE FIUME TORTO - FRAZIONE ZONA INDUSTRIALE  %  90018 TERMINI IMERESE (PA)  % ITALY
Tel. N.,Fax, Email +39 091 8140283, +39 091 8140325, giorgio.merkouris@tecnimpiantispa.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81 (70) as amended
Reference Documents Reg. III/4, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Request 9/12/2025
Expire date 08/12/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Marco Revello S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED482225CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type GDMP-L120-1
Applicant TECNIMPIANTI S.P.A.
STRADA CONSORTILE FIUME TORTO - FRAZIONE ZONA INDUSTRIALE,90018 TERMINI IMERESE (PA),ITALY
Testing standards IMO Res. MSC.81 (70) as amended
Reference standards Reg. III/4, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
December 9, 2025
December 8, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED482225CS
Page 1 of 2

TECHNICAL DATA


The gravity davit is designed for launching life boats having maximum load of 156,0 kN at full complement
of equipment and persons, 78 kN for each davit arm, and it is designed for a maximum design hoisting
load of 69.52 kN, 34.76 kN for each davit arm.
The movement from the inboard to the outboard position is obtained by gravity which allows the davit to
be independent from the main power supply.

REFERENCE DOCUMENTS

Dwg. no. Title Appr. no.
1087300/5010-B Transversal section STRT-63925
1087300/5062-A Upper davit arm STRT-63934
1087300/5063-B Assembly pamphlet STRT-63935
1087300/5065-A Fittings pamphlet STRT-63937
1087300/5066-A Sheaves pamphlet STRT-63938
1087300/5060-0 Fixed structure STRT-63932
1087300/5061-0 Main davit arm STRT-63933
1087300/5064-C Mounting pamphlet STRT-63936
1087300/5034-0 Pendant recovery STRT-63928 (Filed only for information)
1087300/5038-0 Bowsing system STRT-63931 (Filed only for information)
1087300/5031-0 Remote control STRT-63926 (Filed only for information)
1087300/5035-0 Lifelines arrangement STRT-63929 (Filed only for information)
1087300/5036-0 Antirolling devices STRT-63930 (Filed only for information)
1087300/5033-A Maintenance devices STRT-64485 (Filed only for information)
AA00-901-0000 Calculation report STRT-64486 (Filed only for information)
1087300/5032-A Lashing system STRT-64484 (Filed only for information)

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as per test report of 2 and 3/12/2025 (job 2025/PA/01/991).




ATTACHMENT TO
CERTIFICATE No. MED482225CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****