1. Product Description
SIMATIC HMI Unified Basic Panels are touch minitors designed for industrial use. They include four models: MTP400 Unified Basic, MTP700 Unified Basic, MTP1000 Unified Basic, and MTP1200 Unified Basic. The different model of SIMATIC HMI Unified Basic Panels has the different panel size: 4.3". 7.0", 10.1" and 12.1".
● Power supply: 24VDC
● Power consumption:
o MTP400: 7.1W
o MTP700: 8.2W
o MTP1000: 9.3W
o MTP1200: 11.1W
● Degree of protection:
o IP20 (rear enclosure)
o IP65 (front)
● HW version: Bottloader:01
● SW version: V18.00.00.03_62.01.00.17
Normal Work Temperature:
| Type of condition | Mounting position | MTP400-1200 |
| Temperature, Mounting in landscape format | Vertical | 0 ~ 50 °C |
| Temperature, Mounting in landscape format | Inclined, maximum inclination 35° | 0 ~ 40 °C |
| Temperature, Mounting in portrait format | Vertical | 0 ~ 40 °C |
| Temperature, Mounting in portrait format | Inclined, maximum inclination 35° | 0 ~ 35 °C |
TYPE APPROVAL CERTIFICATE
No. ELE174024WS
Enclosure - Page 2 of 2
SIMATIC HMI device
2. Reference Documents
● Application form: Filed by RINA with No. SHEL-21588.
● Technical Document filed by RINA with No. SHEL-21589.
● Test procedure filed by RINA with No. SHEL-21590.
● Manufacturer general information: Filed by RINA with No. SHEL-21591.
● Type test Reports: "Ref No.: STCD-FY2501" carried by "Siemens Ltd., China Chengdu Branch Type Test Center" and "Ref No.: QE24WT1D90451" carried by "China Merchants Testing Vehicle Technology Research Institute Co., Ltd.". Filed by RINA with No. SHEL-21594 and SHEL-21595.
● Routine Test Reports signed by Surveyor and filed by RINA with No. SHEL-21593.
● Asbestos Declaration filed by RINA with No. SHEL-21592.
● Declaration report: Filed by RINA with No. SHEL-21596.
● Narrative report: Filed by RINA with No. SHEL-21597.
3. Note/Remark
● The product is subject to the compliance with RINA Rules and other Standards mentioned on the certificates.
● Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
● Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.