MED129322CS!004ENGD- -  -  N- EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR LOCAL APPLICATION  -N- S- S- -28/02/2023- Marine Equipment- - SN- S- - N-  - 491,066B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED129322CS/004- N-Mar 30, 2027491066
 
Form
  Marine Equipment(TO)
Certification N. MED129322CS/004 - (ENG)
Certificate date 28/02/2023
Type Protezione antincendio
Product Fixed water based local application fire fighting systems components for use in category "A" machinery spaces (Nozzles and performance tests)
Item Nº MED/3.48

Model or Denomin.
Items
EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR LOCAL APPLICATION
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
Place of requester VIA MARIO NATALUCCI 6  %  60131 Ancona (AN)  % ITALY
Tel. N.,Fax, Email 3453666651, +39 071 2865099, fabrizio.raffaelli@valvitalia-fire.com
Directive (EU) 2022/1157
Standards IMO MSC.1/Circ.1387
Reference Documents Reg II-2/10, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7
Request 01/03/2012
Expire date 30/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED129322CS/004

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.48
Description Fixed water based local application fire fighting systems components for use in category "A" machinery spaces (Nozzles and performance tests)
Type EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR LOCAL APPLICATION
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
VIA MARIO NATALUCCI 6,60131 Ancona (AN),ITALY
Testing standards IMO MSC.1/Circ.1387
Reference standards Reg II-2/10, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7
Issued in Genoa on
This Certificate is valid until
February 28, 2023
March 30, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED129322CS/004
Page 1 of 2

System description


Fixed water-based local application fire fighting system for use in machinery spaces of category A.

Pump unit, piping, section control valves, nozzles, control and monitoring system are described in the Technical Documentation Booklet edit by EUSEBI IMPIANTI.


Technical characteristics

Nozzle type: water mist open nozzles designated as EI-FOG 2IXX1.615 and EI-FOG 2IXX1.915.

("2" as open nozzle - "I" as inox material - "XX" last two digit of year of production - "1.6 or 1.9 " K-Factor - "15" as per 115°, angle of nozzle body)


Nozzle performances
EI-FOG 2IXX1.615 EI-FOG 2IXX1.915
K-factor (lpm/bar1/2) 1.6 1.9
Nominal operating pressure 100 bar 100 bar
Minimum vertical distance to fire source 1.0 m 1.0 m
Maximum vertical distance to fire source 5.7 m 3.10 m
Nozzle spacing 3.0 m 3.0 m
Nozzle arrangement (*) 3x3 grid 3x3 grid
Lateral distance from hazard (**) 0.75m 0.75m

(*) According to Par. 3.4.2.1 and Fig. 3.4.2.5 of Appendix toMSC.1/Circ.1387
(**)The outer nozzles should be installed outside of the protected area at a distance of at least 1/4 of the maximum nozzle spacing.

Single row installation: the outer nozzle should be placed outside the protected area at a distance of at least 1/4 of the maximum nozzle spacing.
Reference documents
  1. Installation, operation and maintenance manual - Local Application System, edit by EUSEBI IMPIANTI and filed by RINA with n° CSST-9396.
  2. Clogging test reports n° 149/C dated 23/05/2006, edit by TE.S.I Laboratory and filed by RINA with n° FPE-9928.
  3. Component test report n° E246487 edit by Underwriters Laboratory Inc. on 9/05/2006 and filed by RINA with n° CSST-9397.
  4. Fire test report n° P301978A dated 04/07/2003 edit by SP Swedish National Testing and Research Institute and filed by RINA with n° FPE 9930.
  5. Fire test report n° 214/C edit by TE.S.I Srl and filed by RINA with n° CSST-9398.
  6. Nozzles Heads Type EI-Fog 2Ixx1.1615 and EI-Fog 2Ixx1.1915 issued by EUSEBI IMPIANTI and approved by Rina with n°CSST-14709.




ATTACHMENT TO
CERTIFICATE No. MED129322CS/004
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****