MED264725CS!003ENGD- -  -  N- VIRGO -N- S- S- -10/06/2025- Marine Equipment- - SN- S- - N-  - 532,646B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED264725CS/003- N-Jun 9, 2030532646
 
Form
  Marine Equipment(TO)
Certification N. MED264725CS/003 - (ENG)
Certificate date 10/06/2025
Type Mezzi di salvataggio
Product Lifebuoys
Item Nº MED/1.1

Model or Denomin.
Items
VIRGO
Applicant VELERIA SAN GIORGIO S.R.L.
Place of requester VIA A DE GASPERI 37H  %  16030 Casarza Ligure (GE)  % ITALY
Tel. N.,Fax, Email 0185 467701, 0185 467050, info@veleriasangiorgio.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.
Request 18/03/2025
Expire date 09/06/2030
Head Office RINA Genoa Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED264725CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.1
Description Lifebuoys
Type VIRGO
Applicant VELERIA SAN GIORGIO S.R.L.
VIA A DE GASPERI 37H,16030 Casarza Ligure (GE),ITALY
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.
Issued in RINA Genoa Marine on
This Certificate is valid until
June 10, 2025
June 9, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED264725CS/003
Page 1 of 2

Product description


Outer diameter: 625 ± 1%

Inner diameter: 405 ± 1%


Elliptical section: major axis 124 ± 1%
minor axis 110 ± 1%
Weight of polyethylene shell: 1730 ± 50 g
Mass of the lifebuoy: > 2500 g
Materials: high density polyethylene ERACLENE BB82
Buoyancy material: Polyurethane foam EUROPOL1(Polyol RCC128P and Isocianate RCCMDI), manufacturer
by Europoliuretani Srl
Grabline made with a braid of high density polyethylene Ø > 9.5 mm

Reference documents



Technical drawing "SALVAGENTE ANULARE - VIRGO - Code 12010", issued by Veleria S.Giorgio
and approved by RINA with n° CSST 4728

Materials technical datasheet lifebuoys, issued by Veleria S.Giorgio and filed by RINA with n° CSST 18451

Lifebuoy manufacturing process, issued by Veleria S.Giorgio and filed by RINA with n° CSST 4726

Lifebuoy foaming process Vsg 41, issued by Veleria S.Giorgio and approved by RINA with n° CSST 4731

Tests carried out

Report n° 2010/CS/01/236- 5 and 6 issued by RINA on 04/02/2010
Field of application

Maximum installation height 35m
This lifebuoy is not intended to operate the quick-release arrangement for the self-activated smoke signal
and self-igniting light.
The lifebuoy is to be equipped with retro-reflective material EC type Approved in compliance
with Directive 2014/90/EU as amended.




ATTACHMENT TO
CERTIFICATE No. MED264725CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****