ENGGS23/10/2009
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED125309SH/001
Certificate date 10/23/09
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº A.1/1.23
Model FH65
Identification 0938032
Manufacturer ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Place of production BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Place of requester BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code
Specified For H. AOLI0812
Surveyor Wei Bing Lin
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED125309SH/001

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.23
Description Launching appliances for free-fall lifeboats
Model FH65
Identification 0938032
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
Reference standards For H. AOLI0812
    
Issued at Genoa 
on October 23, 2009

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /09
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED125309SH/001
Manufacturer:
ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Address
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA

Verified components of the equipment (with serial number)
0938032
Technical documentation
Test report issued by RINA on 31st July, 2009 ( n. 0938032) in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code.

Drawing as followings:
 STRT-5533                 65KN launching Appliance of Free-Fall lifeboat 315HX65
             

 
  Lenght of ramp: 7.20 meters.
  Breadth: 2.42 meters
  Safety working Laoad: 65 kn.
  Angle of ramp: 35 deg
  Capacity of drum: 50 meter
   
                                                                    ATTACHMENT TO

                                                    CERTIFICATE No. MED125309SH/001

  Steel wire diameter: 18 x 19+FC, 20mm.
  Hydraulic system working pressure: 18 Mpa
  Type of motor: Y160L-4-H manufactured by Dezhou Hengli Electrical Machinery Co., Ltd
  Winch braking test load: 97.5kn
  Recovery test load: 42kn
  Dynamic test load: 71.5kn
  Static test load: 143kn
  Minimum launching load: 36kn

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****