The lay-flat fire hose with inside diameter d = 40 mm, 45 mm and 52 mm consists of a PVC inner lining and a polyester filament yarn outside white layer.
The lay-flat hose with inside diameter d = 45 mm and 52 mm consists of an EPDM inner lining and a polyester filament yarn outside white layer. The hoses are intended for the fixed fire-fighting hose system.
Hose Type | Average Inside Diameter [mm] | Average Outside Diameter [mm] | Length [m] | Mass [Kg] |
PVC 40 | 39,7 | 45,3 | 20 | 2,56 |
PVC 45 | 44,7 | 50,7 | 20 | 2,94 |
PVC 52 | 51,8 | 57,3 | 20 | 3,72 |
EPDM 45 | 44,6 | 50,7 | 20 | 3,70 |
EPDM 52 | 51,7 | 57,3 | 20 | 4,28 |
Material:
- Inner Lining: PVC or EPDM
PVC, Type: SG3/SG5, Manufacturer: Tangshan Sanyou Alkali Chbride CO., Ltd
EPDM, Type: 3062EM/1066C, Manufacturer: Wuxi Zhongcheng Chemical Co., Ltd or, Shanghai Sinopec Mitsui Elastomers Co., Ltd
- External Fabric: a polyester filament yarn
Type: 1000D/1500D/2000D, Manufacturer: Jiangsu Hengli Chemical Fiber Co., Ltd or, Zhejiang Guxiandao Polyester Dope Yarn Co.,Ltd
Field of Application/Limitation
Approved for use throughout the fire line except for hose reels.
The fire-fighting hose is intended for use at ambient temperature range -20°C up to +60°C.
Pressure Conditions:
Normal Working Pressure | 1,0 MPa |
Minimum Burst Pressure | 4,5 MPa |
Maximum Working Pressure | 1,5 MPa |
Proof Pressure | 2,25 MPa |
Each product is to be supplied with its manual for installation and use.
 | ATTACHMENT TO
CERTIFICATE No. MED204424WS
Page 2 of 3 |
Continued:
Reference Documents
Technical Documents prepared by JiangSu Sooloong Hose MFG CO., Ltd as below:
- Marking filed by RINA with No.: SHFP-26738
- Layer Arrangement (Typical) filed by RINA with No.: SHFP-26916
- Technical Drawings, approved by RINA with No.: SHFP-26916, SHFP-26917, SHFP-26918, SHFP-26919, SHFP-26920;
- Product Specifications, filed by RINA with No.: SHFP-26743 & 26747;
- Operation and Maintenance Instructions, filed by RINA with No.: SHFP-26745.
Test Carried Out
Tests Carried Out in accordance with EN 14540: 2014 as following:
- Test Report (Ref No. 230500080) Dated 2023-06-30 issued by Technicky Skusobny Ustav Piestany s.p., Piestany, Slovak Republic and filed by RINA with No.: SHFP-26751;
- Finished Product Inspection Report (Ref No.: SL/JL-ZJ-A06) witnessed by RINA Surveyor and filed with No.: SHFP-27366.
Marking of Product
The products are to be marked according to EN 14540:2014, Section 8 and with the MED Mark of Conformity (wheel mark). Furthermore, the obligations of manufacturers as defined in Article 12 of Directive 2014/90/EU shall be observed. |