MED077126CSENG- -  -  N- SUPREME DOOR -N- S- S- -02/03/2026- Marine Equipment- - SN- S- - N-  - 781,145B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED077126CS- N-Mar 1, 2031781145
 
Form
  Marine Equipment(TO)
Certification N. MED077126CS - (ENG)
Certificate date 02/03/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
SUPREME DOOR
Applicant OLCESE RICCI S.R.L.
Place of requester VIA E. CAORSI 49 A  %  16030 Sori (GE)  % ITALY
Tel. N.,Fax, Email 0185700425; d.oteri@olcesericci.com
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511/Rev.1
Request 02/02/2026
Expire date 01/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED077126CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type SUPREME DOOR
Applicant OLCESE RICCI S.R.L.
VIA E. CAORSI 49 A,16030 Sori (GE),ITALY
Testing standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511/Rev.1
Issued in Genoa on
This Certificate is valid until
March 2, 2026
March 1, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED077126CS
Page 1 of 2

Product description

Hinged door, installed on an aluminum bulkhead, with clear opening of 900 × 1900 mm. The leaf, with dimensions 1016 × 2016 mm and thickness 86 mm, is composed, starting from the side opposite the hinges, of a 3mm thick stainless-steel sheet, an insulation package consisting of one layer of Rockwool mineral wool type SeaRox SL 640 with density 130 kg/m³ and thickness 30 mm, one layer of PROMAGUARDALU with thickness 10 mm and density 240 kg/m³, and one layer of Rockwool mineral wool type SeaRox SL 640 with density 130 kg/m³ and thickness 30 mm, and a 4 mm thick stainless-steel sheet. On the 4 mm sheet of the leaf, the following stiffeners are provided: 5 horizontal stiffeners with a variable pitch from 157 to 650 mm, made of a shaped stainless-steel profile measuring 75×20×4 mm; the coupling of the outer sheet with the inner sheet is achieved by means of stainless-steel screws with a diameter of 6 mm and variable pitch from 140 mm to 180 mm, fixed to an L-shaped stainless-steel profile measuring 79×30x4 mm; the perimeter of the leaf consists of a stainless-steel flat bar measuring 93×4 mm.
The door frame is made of an L-shaped stainless-steel profile measuring 90 × 88 mm with a thickness of 8 mm, fixed to the aluminum bulkhead by M10×35 stainless-steel bolts with a spacing of 50 mm. The frame is insulated on the exposed and unexposed side, for 150 mm, with two layers of Rockwool mineral wool type SeaRox SL620, thickness 30 mm and density 100 kg/m³ each, fixed with pins with a variable pitch from 100 to 350 mm.
In the folded rebate edge of the leaf, on the hinge side, a gasket EME Gasket type exto performing silicone CSI 400 FF with Soliani EMC braid, measuring 35×20 mm, is provided; on the side opposite the hinges, a gasket EME Gasket type exto performing silicone CSI 400 FF with Soliani EMC braid, measuring 30×15 mm, is provided. On the perimeter edge of the leaf, an intumescent gasket type Promaseal LSK, thickness 2.5 mm, is provided.
The leaf is equipped with 3 hinges and an external lever-type closing system that acts on 3 stainless-steel bars operated by a central handle located on both sides. The door is also equipped with a Sargent & Greenleaf type 8550 combination lock with the dial placed on the side opposite the hinges, and a stainless-steel multipoint lock Olcese Ricci type RC4.
Field of application
Fire resistant A-60 Class single leaf hinged door installed on aluminum bulkhead.
The door is also in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- doors without windows
- maximum door size tested;
- door used with a fire tested frame design.
Reference documents
Olcese Ricci drawing No. "Supreme Door 27539" Rev. 02 dated 23/02/2026 enclosed on Test Report N.2026CS01771 dated 02/03/2026 .
Tests carried out
Tests as per RINA Test Laboratory Report No. 2026CS01771 dated 02/03/2026 issued according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED077126CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****