MED304423WS!002ENG- -  -  N- H3-CA, H3-RI, H3-EL -N- S- S- -24/12/2025- Marine Equipment- - SN- S- - N-  - 1,205,734B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED304423WS/002- N-Dec 23, 20301205734
 
Form
  Marine Equipment(TO)
Certification N. MED304423WS/002 - (ENG)
Certificate date 24/12/2025
Type Protezione antincendio
Product Fixed oxygen analysis and gas detection equipment: (b) category 3 - explosive gas atmospheres
Item Nº MED/3.54b

Model or Denomin.
Items
H3-CA, H3-RI, H3-EL
Applicant RKMC CO., LTD.
Place of requester 4F, Building 23, Kecheng Science South Park, No. 19 Lanhua Road, Pukou,  %  211806 Nanjing (Jiangsu)  % CHINA
Tel. N.,Fax, Email 025-83612377, ---, dave.zhang@RKMC-ASIA.COM
Directive (EU) 2025/1533
Standards EN 50104:2019 incl. EN 50104:2019/A1:2023, EN IEC 60079-0:2018 incl. AC:2020-02, AND A11:2024, EN 60079-29-1:2016 incl. EN 60079-29-1:2016/A1:2022 and EN 60079-29-1:2016/a11:2022, IEC 60092-504:2016, IEC 60533:2015, For combined O2/HC systems, additionally: IMO MSC.1/Circ. 1370.
Reference Documents SOLAS Reg. II-2/4, SOLAS Reg. VI/3, IMO Res. MSC.98(73)-(FSS Code) 15. For combined O2/HC systems additionally: IMO MSC.1/Circ.1370.
Expire date 23/12/2030
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
No. MED304423WS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.54b
Description Fixed oxygen analysis and gas detection equipment: (b) category 3 - explosive gas atmospheres
Type H3-CA, H3-RI, H3-EL
Applicant RKMC CO., LTD.
4F, Building 23, Kecheng Science South Park, No. 19 Lanhua Road, Pukou,,211806 Nanjing (Jiangsu),CHINA
Testing standards applied EN 50104:2019 incl. EN 50104:2019/A1:2023, EN IEC 60079-0:2018 incl. AC:2020-02, AND A11:2024, EN 60079-29-1:2016 incl. EN 60079-29-1:2016/A1:2022 and EN 60079-29-1:2016/a11:2022, IEC 60092-504:2016, IEC 60533:2015, For combined O2/HC systems, additionally: IMO MSC.1/Circ. 1370.
Regulations specified and reference documents SOLAS Reg. II-2/4, SOLAS Reg. VI/3, IMO Res. MSC.98(73)-(FSS Code) 15. For combined O2/HC systems additionally: IMO MSC.1/Circ.1370.
Issued in SHANGHAI on
This Certificate is valid until
December 24, 2025
December 23, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
No.  MED304423WS/002
Page 1 of 3
1. Product Description

H3-Series Contains the following types:

Model
H3-CA
H3-RI
H3-EL
Detection principle
Catalytic combustion type
Infrared
Electrochemical
Gas to be detected
Combustible gas
Combustible gas
O2
Detection range
0 – 100% LEL
0 – 100% LEL
0-25%VOL
Power supply voltage
24 VDC(18~32VDC)
Explosion protection
EXDIICT6
Ingress Protection
IP66
Operating temperature
-40°C ~ +70°C














 



ATTACHMENT TO
CERTIFICATE No. MED304423WS/002
Page 2 of 3


2. Application/Limitation

Ex certification is not covered by this certificate, Applications in hazardous areas are to be approved in each case according to the Rules and Conditions for Safe Use specified in a valid Ex-Certificate issued by a Notified or Recognized Certification Body.

3. Design Assessment

The design assessment is based on SOLAS Reg. II-2/4, SOLAS Reg. VI/3, IMO Res. MSC.98(73)-(FSS Code)15. For combined O2/HC systems additionally: IMO MSC.1/Circ.1370.

4. Tests Carried Out

The test report, including environment test, EMC test and performance test, complies with EN 50104:2019, EN IEC 60079-0:2018 incl. AC:2020, EN 60079-29-1:2016, IEC 60092-504:2016, and IEC 60533:2015. For combined O2/HC systems,additionally: IMO MSC.1/Circ. 1370. Tests were conducted in authorized laboratory and comply with these standards. Reports are filed by RINA with drawing No.: SHEL-26799 and SHEL-26797 ~26802..



Inspection report (Date on 2025, July 7) edit by "RKMC CO., LTD. " and witnessed by RINA Surveyor. Filed by RINA with drawing No.:SHEL-26794.

5. Reference Documents
Analysis and assessment of risk, Filed by RINA with drawing No. SHEL-26791.
European Representative Authorization Letter. Filed by RINA with drawing No.SHEL-26789.
Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-26792.

Technical drawings and manuals approved and filed by RINA listed on Approval letter No.: SHEL/2025/1160/ZHITA and SHEL/2025/1461/ZHITA.

6. Marking of Product

The product is to be indelibly marked with name and address of the manufacturer, type designation, batch or serial number or other elements allowing their identification and the MED Mark of Conformity.





ATTACHMENT TO
No. MED304423WS/002
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****