MED384625CS!002ENGD- -  -  N- FLEXIGEL DECORO -N- S- S- -12/09/2025- Marine Equipment- - SN- S- - N-  - 379,415B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED384625CS/002- N-Sep 11, 2030379415
 
Form
  Marine Equipment(TO)
Certification N. MED384625CS/002 - (ENG)
Certificate date 12/09/2025
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Item Nº MED/3.18c
USCG Category N° 164.117

Model
Items/Sizes
FLEXIGEL DECORO
Applicant API SPA
Place of requester Largo Guido Donegani 2  %  20121 Milano (MI)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2024/1975
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Request 21/07/2030
Validity 11/09/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED384625CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.18c
USCG Category Nº 164.117
Description Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type FLEXIGEL DECORO
Applicant API SPA
Largo Guido Donegani 2,20121 Milano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Issued in Genoa on
This Certificate is valid until
September 12, 2025
September 11, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED384625CS/002
Page 1 of 2

Product description


Deck finish material, composed of three components:
1st basic component: mixture of hydroxylated polyols, plasticizers and mineral fillers;
2nd hardener component: mixture of isocyanate polymers;
3rd accelerating component: Metal salts in solvent.

- mass per area (g/m2) 1300
- thickness (mm) 3 ± 0,1

The material may also be produced by:
· API SpA, Regione San Marco 7 - 07041 Alghero - SS - ITALY.
· Stonhard, 7 Esterbrook Lane - Cherry Hill - NJ 08003 - USA.
· Stonhard, 1000 E. Park Ave. - Maple Shade - NJ 08052 - USA.
Field of application

As deck finishing material.
The product may also be applied over any low flame-spread floor covering or non-combustible material.
Tests carried out


Tests as per RINA Test Laboratory reports No. 2020CS01978/2 and No. 2020CS01978/3 dated 21 September 2020, issued according to:
  • IMO 2010 FTP Code Part 5
  • IMO 2010 FTP Code Part 2




  • ATTACHMENT TO
    CERTIFICATE No. MED384625CS/002
    Pages 2 of 2
    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
    XXXX/YY
    "WHEELMARK FORMAT"

    XXXX
    Notified Body number undertaking surveillance module
    YY
    Last two digits of year mark affixed
         
    ______________________________________________
    General conditions for the approval
    a) The initial conditions verified by RINA at the time of the approval are to be maintained
    b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
    c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
    d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
    e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

    f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


    __________________________________________
    Enrico Cabella
    **** NOTICE: This is NOT an official certificate ****