MED596124WS!001ENGD- -  -  N- YASD-40, YASD-50 -N- S- S- -10/04/2025- Marine Equipment- - SN- S- - N-  - 1,187,390B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED596124WS/001- N-Apr 9, 20301187390
 
Form
  Marine Equipment(TO)
MED610624WS/001
Certification N. MED596124WS/001 - (ENG)
Certificate date 10/04/2025
Type Protezione antincendio
Product Fire-fighting hoses - non-percolating lay flat firefighting hoses (range of the inside diameter from 25 mm to 52 mm)
Item Nº MED/3.29

Model or Denomin.
Items
YASD-40, YASD-50
Applicant Jiangsu Yean Environmental Protection Equipment Science and Technology Co., Ltd.
Place of requester No.88 Yuanlin Road, Xinjie Town, Dongtai City,Jiangsu Province % CHINA
Tel. N.,Fax, Email 0515-85755695, ---, mym85751818@163.com
Directive (EU) 2024/1975
Standards EN 14540:2014
Reference Documents SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Request 2024/08/30
Expire date 09/04/2030
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED596124WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.29
Description Fire-fighting hoses - non-percolating lay flat firefighting hoses (range of the inside diameter from 25 mm to 52 mm)
Type YASD-40, YASD-50
Applicant Jiangsu Yean Environmental Protection Equipment Science and Technology Co., Ltd.
No.88 Yuanlin Road, Xinjie Town, Dongtai City,Jiangsu Province,CHINA
Testing standards EN 14540:2014
Reference standards SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in SHANGHAI on
This Certificate is valid until
April 10, 2025
April 9, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED596124WS/001
Page 1 of 3

Product Description


Fire-fighting Hoses (Type: YASD-40, YASD-50): Non-percolating lay flat fire-fighting hoses for fire water systems

Temperature Range: -30°C / 70°C

Maximum Working Pressure: 1.5 Mpa

Material:

- Inside lining: Thermal Plastic Polyurethane (TPU),

Type: ER-88AS,

Manufacturer: Coating Fine Chemical (KunShan) Co.,Ltd

- External Fabric: Filament Yarn,

Type: Polyester,

Manufacturer: Jiangsu Hengli Chemical Fiber Co.,Ltd

Model
Internal diameter
Layflat breadth
Outside diameter
YASD-40
40 mm
62 mm
43 mm
YASD-50
50 mm
86 mm
53 mm

Model
External Fabric Thickness
Inside Lining Thickness
Weight (Kg/m)
YASD-40
0.95 mm
0.55 mm
0.175
YASD-50
0.95 mm
0.55 mm
0.224
Note: Above Data from Technical Data (Ref. RINA filed No.: SHFP-30318).

Field of Application/Limitation

Approved for discharging water from the fire main by using fire hoses (SOLAS II-2/10.2.3 and 2000 HSC Code, 7.7.5).

Each product is to be supplied with its manual for installation and use.

ATTACHMENT TO
CERTIFICATE No. MED596124WS/001
Page 2 of 3
Reference Documents

Technical Documents prepared by Jiangsu Yean Environmental Protection Equipment Science and Technology Co., Ltd:

- Qualified Supplier, filed by RINA with No.: SHFP-30314;

- Technical Data, filed by RINA with No.: SHFP-30318;

- Technical Drawing of YASD Hose, approved by RINA with No.: SHFP-30319.


Test Carried Out

Tests Carried Out in accordance with EN 14540: 2014 as following:

- Test Report, issued by Taizhou Institute of Product Quality Supervision and Inspection, and filed by RINA with No.: SHFP-29912 and SHFP-29913.


Marking of Product

The products are to be marked according to EN 14540:2014, Section 8 and with the MED Mark of Conformity (wheel mark). Furthermore, the obligations of manufacturers as defined in Article 12 of Directive 2014/90/EU shall be observed.




ATTACHMENT TO
CERTIFICATE No. MED596124WS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****