Bulkhead composed of a carbon steel plate having thickness of 3 mm fitted with āLā shaped stiffeners, having dimensions of 65x65 mm and thick 6 mm, fitted every 600 mm. The insulating material, named PROMAGUARD, is composed of panels of material having, each, dimensions of 1200x600 mm, thickness of 10 mm and density of 240 kg/m3. Such material, composed of two panel layers, on the stiffened side, is laid on the stiffeners and fixed to the bulkhead plate, by means of pins welded with pitch ranging from 400 mm up to 540mm. The panels are fitted in way that the longer side is parallel to the bulkhead stiffeners. The panel joints are obtained approaching the panels. The external panel layer is applied such as the transversal panel joints are staggered by 600 mm, with respect to the same relevant to the lower layer.
Field of application
Fire resistant A-60 Class bulkhead for general application.
The certified item is not in compliance with the requirement of Fire Test Procedure Code Part 3 regarding the plate thickness and this characteristic must be taken into account.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.Reference documents
Promat Research and Technology Centre drawing No. R05 DAM 26, Rev. 0, dated 12 February 2026, included in RINA Test Laboratory test report No. 2026CS01658 issued on 20/02/2026.
Tests carried out
Tests as per RINA Test Laboratory test report No. 2026CS01658 issued on 20/02/2026 according to IMO Res. MSC.307(88)-(2010 FTP Code) as amended, Part. 3. |