MED710026WSENGB- -  -  N- SSI RB-450D -N- S- S- -28/09/2026- Marine Equipment- - SN- S- - N-  - 1,094,679B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED710026WS- N-Sep 27, 20311094679
 
Form
  Marine Equipment(TO)
MED710026WS
Certification N. MED710026WS - (ENG)
Certificate date 28/09/2026
Type Mezzi di salvataggio
Product Battelli di emergenza rigidi
Item Nº MED/1.18

Model or Denomin.
Items
SSI RB-450D
Applicant SURVIVAL SYSTEMS INTERNATIONAL OFFSHORE & MARINE PTE LTD
Place of requester 39B JALAN PEMIMPIN #02-01 PRIME INDUSTRIAL BUILDING  %  577184 SINGAPORE
Tel. N.,Fax, Email +65 91773701, +65 63390611, wouter.maes@ssisingapore.com
Directive (EU) 2026/1434
Standards IMO Res. MSC 81(70) as amended,IMO MSC/Circ.1006
Reference Documents SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) V, IMO Res.MSC.97(73)-(2000 HSC Code) 8.
Request 2026/07/30
Expire date 27/09/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED710026WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/1.18
Description Rigid rescue boats
Type SSI RB-450D
Applicant SURVIVAL SYSTEMS INTERNATIONAL OFFSHORE & MARINE PTE LTD
39B JALAN PEMIMPIN #02-01 PRIME INDUSTRIAL BUILDING,577184 SINGAPORE
Testing standards IMO Res. MSC 81(70) as amended,IMO MSC/Circ.1006
Reference standards SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) V, IMO Res.MSC.97(73)-(2000 HSC Code) 8.
Issued in SHANGHAI on
This Certificate is valid until
September 28, 2026
September 27, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Peng Fang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED710026WS
Page 1 of 3

Product Description


The 4.5 Meters Rigid Rescue Boat (Type: SSI RB-450D) has a rigid hull made by fiberglass reinforced plastic and filled with polyurethane foam among seats, hulls to provide buoyancy.

Main Characteristics:


- Length Overall: 4.54 meters (include fender);
- Molded Length: 4.50 meter;
- Breadth Maximum: 1.90 meters (include fender);
- Molded Depth: 0.86 meter.

Proposed Propulsion System:


1. In-board Diesel Engine, Manufactured by BUKH A/S, Model DV24RME, Power 17.6 KW, Propeller Dimension: 320 mm Pitch x 400 mm Diameter; Alternative,
2. In-board Diesel Engine, Manufactured by Zhenjiang Siyang Diesel Engine Manufacturing Co., Ltd, Model 380J-3, Power 20.6 KW, Propeller Dimension: 460 mm Pitch x 400 mm Diameter.

Speed: ≥ 6 knots

Weight of the boat:


1. Fully equipped: 1130 Kg;
2. Fully manned with No. 6 persons (82.5 Kg as weight of each person): 1625 Kg.

Hull Material: GRP.


Color: Orange Hull
- Gel Coat, Type: C138, Manufactured by INEOS (Changzhou) Specialty Materials Co., Ltd.;
- Polyester Resin, Type: TM-107M, Manufactured by Changzhou Huari New Materials Co., Ltd.;
- Chopped Strand Mat, Type: EMC300, Manufactured by Changzhou Tianma Group Co., Ltd.;
- Woven Roving, Type: EWR400/EWR600/EWR800, Manufactured by Changzhou Tianma Group Co., Ltd..
[Matting Description: Gelcoat+EMC300+EWR800+EWR800+EWR800+EWR800+EWR600].

- Buoyant material: Rigid Polyrethane Foam Plastic, Manufactured by Jiangyin Tonglian Polyurethane Material Co.,Ltd.






ATTACHMENT TO
CERTIFICATE No. MED710026WS
Page 2 of 3


Continued:

Hook Release Device:


- No.1 Safety Quick Release Hook Device (Off-load Type, SWL of 3.5T), Model JXN-7 Manufactured by Jiangsu Jiaoyan Marine Equipment Co., Ltd. Alternative,
- No.1 Safety Quick Release Hook Device (Off-load Type, SWL of 3.5T), Model HMK 3.5, Manufactured by H.Henriksen AS.

Righting System: Float Tank for self-righting after capsize

Fuel Tank Capacity: 50 Liters.

Towing force / Bollard Pull : 2400 N (DV24RME)


2600 N (380J-3)

Field of Application

Maximum Number of persons: 6 (No.5 Seated and No.1 on the Stretcher)

Design Assessment

The design assessment is based on IMO Res.MSC 48(66) as amended by IMO Res. MSC.207(81), IMO Res. MSC.218(82), IMO Res. MSC.272(85) and IMO Res. MSC.320(89) etc..

Rescue boat equipment and marking/instructions to be inspected after installation onboard the ship. Equipment shall comply with LSA Code and IMO Res.MSC.81(70) part 1 as amended by IMO Res. MSC.226(82), IMO Res. MSC.274(85), IMO Res. MSC.321(89) and IMO MSC.323(89) etc..

Production and installation testing shall be carried out according to IMO Res. MSC. 81(70), part 2.


Tests Carried Out

The Rescue Boat was tested as per:
- Test Report of Fire-retardant & Flame-resistant test materials (Ref No. 2020-09-M009) issued by Shanghai R&D Center for Polymer Materials in accordance to MSC/Circ 1006 and filed by RINA with No. SHFP-39190;
- Consign Test Report (FRP Test Report) (Ref No. 2020-09-0951) issued by Shanghai R&D Center for Polymer Materials and filed by RINA with No. SHFP-39191;
- Evaluation and Test Report witnessed by RINA on 18 September 2026 in accordance with Recommendation on testing of Lifesaving Appliances, IMO Res. MSC.81(70) part 1, as amended by IMO Res. MSC.226(82), IMO Res. MSC.274(85) and IMO Res. MSC.321(89) and LSA Code as amended by Res. MSC.218(82) and Res. MSC.320(89), and filed by RINA with No. SHFP-40092.

Reference Documents

Technical Drawings and Manuals approved and filed by RINA listed on Approval letter No. SHFP/2026/1055/SQN.




ATTACHMENT TO
CERTIFICATE No. MED710026WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Peng Fang
**** NOTICE: This is NOT an official certificate ****