MED493025CS!007ENGB- -  -  N- 19 mm PROMARINE ® -640T Wall Panel System -N- S- S- -25/11/2025- Marine Equipment- - SN- S- - N-  - 704,840B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED493025CS/007- N-Nov 24, 2030704840
 
Form
  Marine Equipment(TO)
MED493025CS/007
Certification N. MED493025CS/007 - (ENG)
Certificate date 25/11/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items/Sizes
19 mm PROMARINE ® -640T Wall Panel System
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
Place of requester BORMSTRAAT 24  %  2830 Tisselt  % BELGIUM
Tel. N.,Fax, Email +32 15 71 82 70, ---, invoices.be@etexgroup.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120,IMO MSC.1/Circ. 1581
Request 27/10/2025
Validity date 24/11/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED493025CS/007

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type 19 mm PROMARINE ® -640T Wall Panel System
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
BORMSTRAAT 24,2830 Tisselt,BELGIUM
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO MSC/Circ. 1120; IMO MSC.1/Circ. 1581
Issued in Genoa on
This Certificate is valid until
November 25, 2025
November 24, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED493025CS/007
Page 1 of 2

Product description



Bulkhead having high maximum dimension of 2528 mm consisting of panels having length of 2500 mm and width of 1200 mm. Each panel is composed of one slab of product named PROMARINE ® -640T, 19 mm thick and having density of 640 kg/m3. The panels were joined vertically together using 1 mm thick galvanized mild steel C splines. The panels are laid, on top, bottom and left sides, with C steel profiles having respectively dimensions of 20x50x1.5 mm and 25x20x1.5 while on right side by means of 2 overlapped L profile having dimensions of 25x25x1.5 mm and 25x50x1.5 mm. The steel profiles are fixed to structure with screws every 500 mm or spot welded every 200 mm.

Field of application
Fire resistant B-15 Class bulkhead.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents
EXOVA Warringtonfire Laboratory Report No. 337759 issued on 3 April 2014 according to IMO 2010 FTP Code Part. 3 and Promat drawing No. SP 1411 approved on 16 February 2021 with endorsement No. LABS-2176.

Tests carried out
Test as per EXOVA Warringtonfire Laboratory Report No. 337759 issued on 3 April 2014 according to IMO 2010 FTP Code Part. 3




ATTACHMENT TO
CERTIFICATE No. MED493025CS/007
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****