MED497821CS!001ENGB- -  -  N- GLASS WINDOW A0 -N- S- S- -22/02/2022- Marine Equipment- - SN- S- - N-  - 342,694B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED497821CS/001- N-Feb 21, 2027342694
 
Form
  Marine Equipment(TO)
MED497821CS/001
Certification N. MED497821CS/001 - (ENG)
Certificate date 22/02/2022
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
GLASS WINDOW A0
Applicant HET ANKER BV
Place of requester Kaatsbaan, 10 4209 AD SCHELLUINEN  % NETHERLANDS
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 14/12/2021
Expire date 21/02/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED497821CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type GLASS WINDOW A0
Applicant HET ANKER BV
Kaatsbaan, 10 4209 AD SCHELLUINEN,NETHERLANDS
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
February 22, 2022
February 21, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED497821CS/001
Page 1 of 2

Product description

Square window having maximum clear size of 1500x1500 mm. The glass compound, moving from the exposed side, is composed of a toughened pane having thickness of 6 mm (manufacturer Veneto Vetro), a cavity 15 mm deep, a toughened pane having thickness of 12 mm (manufacturer Veneto Vetro), a PVB layer 1.52 mm thick and a toughened pane having thickness of 12 mm (manufacturer Veneto Vetro). The frame is composed of a steel profile having height of 140 mm and thickness of 12 mm, welded to the bulkhead on both sides. The glass retaining frame, fitted on the side exposed to the fire and composed of a stainless steel flat having thickness of 8 mm and width of 35 mm, is fixed to the frame by means of M6 screws fitted with pitch of 50 mm. Between the glass faces, the frame and the glass retaining frame, ceramics gaskets, 2 mm thick, are fitted. Between the glass edge and the frame, on the lower side, spacers of calcium silicate type PROMATECT H, having thickness of 4 mm, are fitted. The glass panes are sealed by means of silicone type FIRESTOP 700. The window may be fitted with spray nozzles (maximum three), having maximum diameter of 30 mm and maximum length of 60 mm.
The window may also be produced by Naval Suppliers Srl - Zona Industriale 24 - 33049 San Pietro al Natisone (UD) - Italy.

Field of application
Fire resistant A-0 Class window with fire hazard in the inner side of the application.

Reference documents
NAVAL SUPPLIERS drawing No. FTW-A0-SQ1-1616-6+A15+12-12 dated 7 February 2017 approved on 21 February 2017 with endorsement No. LABS-1416.
Tests carried out
Tests as per RINA Test Laboratory Laboratory report No. 2016CS012846/5 issued on 21 February 2017 according to IMO 2010 FTP Code Part. 3 Appendix 2 - A.I - Windows.




ATTACHMENT TO
CERTIFICATE No. MED497821CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****