MED049125CS!002ENGD- -  -  N- PROTAL SUPERECO F3 -N- S- S- -07/02/2025- Marine Equipment- - SN- S- - N-  - 537,075B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED049125CS/002- N-Feb 6, 2030537075
 
Form
  Marine Equipment(TO)
MED063424MI/013
Certification N. MED049125CS/002 - (ENG)
Certificate date 07/02/2025
Type Protezione antincendio
Product Expansion foam for fixed fire extinguishing systems for chemical tankers
Item Nº MED/3.59

Model or Denomin.
Items
PROTAL SUPERECO F3
Applicant PROFOAM SRL
Place of requester VIA MARCONI, 21  %  28060 San Pietro Mosezzo (NO)  % ITALY
Tel. N.,Fax, Email 0321 485511, 0321 485522, ---
Directive (EU) 2024/1975
Standards IMO MSC.1/Circ.1312, IMO MSC.1/Circ.1312/Corr.1.
Reference Documents SOLAS 74 Reg.II-2/1, IMO Res. MSC.4(48)-(IBC Code) 11, IMO MSC/Circ.553
Request 14/01/2025
Expire date 06/02/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Paolo Brocca S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED049125CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.59
Description Expansion foam for fixed fire extinguishing systems for chemical tankers
Type PROTAL SUPERECO F3
Applicant PROFOAM SRL
VIA MARCONI, 21,28060 San Pietro Mosezzo (NO),ITALY
Testing standards IMO MSC.1/Circ.1312, IMO MSC.1/Circ.1312/Corr.1.
Reference standards SOLAS 74 Reg.II-2/1, IMO Res. MSC.4(48)-(IBC Code) 11, IMO MSC/Circ.553
Issued in Genoa on
This Certificate is valid until
February 7, 2025
February 6, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED049125CS/002
Page 1 of 2

Technical Characteristics
Foam Concentrate PROTAL SUPERECO F3
Type of foam concentrate Type B - Low-expansion Protein foam concentrate
Mixing Ration 6%
Density (20 °C) 1.13 - 1.19 g/cm3
Viscosity (20 °C) ≤ 20 mm2/s
pH value (20 °C) 6.0 - 9.5
Lowest temperature for use ≤ - 15 °C
Expansion Ratio (20 °C) ≥ 7
25% Drainage time ≥ 7'
Field of application

Fixed foam fire extinguisdhing systems for cargo deck using low-expansion foam concentrate to extinguish fires of the following products, at ambient temperature and pressure:
  • chemical products for which regular foam is accepted, in accordance with Chapter 17 of IBC Code and Chapter 6 of BCH Code;
  • chemical products for which neither IBC Code nor BCH Code apply and for which regular foam is accepted, in accordance with the IMO MSC/Circ.553.
Tests carried out

In accordance with IMO Circular MSC.1/Circ.1312 and MSC.1/Circ.1312/Corr.1 - "Revised Guidelines for the Performance and Testing Criteria and Surveys of Foam Concentrates for Fixed Fire-Extinguishing Systems"
Technical Documentation

1. MPA Dresden Declaration of Conformity KB 38/24 - RINA File No. CSST-24045
2. MPA Dresden Test Report 20231059/Pf20 - RINA File No. CSST-24046
3. Profoam "PFOS-free" Declaration - RINA File No. CSST-24047
4. Profoam ST Risk Evaluation - RINA File No. CSST-24048




ATTACHMENT TO
CERTIFICATE No. MED049125CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****