MED495223WS!003ENGD- -  -  N- JSFZ-II -N- S- S- -21/03/2024- Marine Equipment- - SN- S- - N-  - 1,220,511B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED495223WS/003- N-Mar 20, 20291220511
 
Form
  Marine Equipment(TO)
MED151824WS/003
Certification N. MED495223WS/003 - (ENG)
Certificate date 21/03/2024
Type Mezzi di salvataggio
Product Immersion suits and anti-exposure suits designed to be worn WITHOUT a lifejacket: (b) immersion suit with inherent insulation
Item Nº MED/1.6b

Model or Denomin.
Items
JSFZ-II
Applicant Dongtai Xincunhong Life-saving Equipment Co.,Ltd
Place of requester No.4,North Park Road,Marine Engineering Special Equipment Industrial Park, Xinjie Town Dongtai (Jiangsu)  % China
Tel. N.,Fax, Email 13601428219, ---, mym85751818@163.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81 (70), as amended
Reference Documents SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/32, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC/Circ.1046, IMO MSC.1/Circ.1628.
Request 2023.11.15
Expire date 20/03/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED495223WS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.6b
Description Immersion suits and anti-exposure suits designed to be worn WITHOUT a lifejacket: (b) immersion suit with inherent insulation
Type JSFZ-II
Applicant Dongtai Xincunhong Life-saving Equipment Co.,Ltd
No.4,North Park Road,Marine Engineering Special Equipment Industrial Park, Xinjie Town Dongtai (Jiangsu),China
Testing standards IMO Res. MSC.81 (70), as amended
Reference standards SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/32, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC/Circ.1046, IMO MSC.1/Circ.1628.
Issued in SHANGHAI on
This Certificate is valid until
March 21, 2024
March 20, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED495223WS/003
Page 1 of 3

Product Description


The JSFZ-II insulated immersion suits is manufactured in four sizes:
- M Size: Max. Height 1.75 meter;
- L Size: Max. Height 1.85 meter;
- XL Size: Max. Height 1.95 meter;
- XXL Size: Max. Height: 2.05 meter.

The immersion suits is manufactured in three colors:


- JSFZ-II-O (orange);
- JSFZ-II-Y (yellow);
- JSFZ-II-R (red).

The immersion suits covers the whole body (feet and hands included) except the face.

The immersion suits has buoyancy which is not reduced by more than 5% after 24 h submersion in fresh water and does not depend on the use of loose granulated materials.

The wearer's body core temperature does not fall more than 2°C after a period of 6 h immersion in calm circulating water at a temperature of between 0°C and 2°C.


Material and Components
Item
Type
Manufacturer
Body cloth
CR Neoprene sponge rubber 5.5mm
Wuxi Ming Wei Textile Co., Ltd
Retro-reflective Tape
DM1101A
Daoming Optics & Chemical Co., Ltd
Whistle
plastics
Yuyao Songge Plastic Industry Co., Ltd
Lifejacket Light
JHYD-I
Dongtai City Jianghai Lifesaving & Fire-fighting Equipment Co., Ltd
Belt
1300mm
Dongtai Xincunhong Lifesaving Equipment Co., Ltd
Floating pillows
CR Neoprene sponge rubber 5.5mm
Wuxi Ming Wei Textile Co., Ltd
Watertight zipper
670mm
Jiaxing Shuangjin Zipper Co., Ltd

Trademark: XINCUNHONG,CUNHONG,SAFINDO,SAFEGARD,PORTMARINE,PETREL,POSEIDON


 



ATTACHMENT TO
CERTIFICATE No. MED495223WS/003
Page 2 of 3

Continued:

Design Assessment

Insulated immersion suits designed to be worn without a lifejacket with additional lifting loop in compliance with IMO Res.MSC.323(89).

Tests carried out in accordance with revised recommendation on testing of lifesaving appliance, IMO Res.MSC.81(70), Part 1, including IMO Res.MSC.200(80), IMO Res.MSC.226(82), IMO Res.MSC.323(89), IMO Res. MSC.378(93), etc..

Production tests shall be conducted for each suit in accordance with IMO Res. MSC.81(70), Part 2 as amended.


Reference Documents

Technical drawings and manuals edited by Dongtai Xincunhong Lifesaving Equipment Co.,Ltd, approved and filed by RINA as following:
- Technical drawing, approved by RINA with No.: SHFP-26337;
- Bill of Material, approved by RINA with No.: SHFP-26332;
- Technical Specification, approved by RINA with No.: SHFP-26336;
- Marking, approved by RINA with No.: SHFP-26334;
- Operation and Maintenance Manual, filed by RINA with No.: SHFP-26338.

Tests Carried Out

- Evaluation and Test Report (JSFZ-II) (Ref No.: 2023199), issued by Wuhan Testing Center of Marine Life-saving Appliances, filled by RINA with No.:SHFP-26333.

Remarks

The immersion suit can be equipped with different position indicating lights and Retro-reflective materials EC type Approved in compliance with Directive 2014/90/EU as amended. Releasable buoyant line and suitable means to lift the wearer from the water, in compliance with MSC.207(81).

Notes

For the immersion suits to be placed on board after October 10, 2026, the Retro-reflective materials to be fitted as per Annex I, Para 1 of IMO Res. MSC.481(102).




ATTACHMENT TO
CERTIFICATE No. MED495223WS/003
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****