MED406923CS!001ENGBN
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo di qualità
Module: B
Certification N. MED406923CS/001
Certificate date 12/6/23
Description Sottofondo di copertura del ponte di coperta,Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type Protezione antincendio
Product Sottofondo di copertura del ponte di coperta,Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Item Nº MED/3.1,MED/3.18c
USCG Category N° 164.106,164.117
Model or Denomin. RESISIRN A
Applicant SIRN S.R.L.
Place of requester VIA CASAREGIS 22/1  %  16129 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 586771, 010 542678, genova@sirn.it
Directive (EU) 2023/1667
Dati Certificato D o E
Certification N. MED207524GE/010
Certificate date 12/12/2024
   

Emiliano Deghenghi S


PRODUCTION QUALITY ASSURANCE (MODULE D)
CERTIFICATE No.  MED207524GE/010

This is to certify
that RINA Services S.p.A. did undertake the relevant quality assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2024/1975 and according to the type described in the EC Type Examination Certificate (Module B) below indicated.
MED Item Nº MED/3.1,MED/3.18c
USCG Category Nº 164.106,164.117
Description Primary decks covering; Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type RESISIRN A
Applicant SIRN S.R.L.
VIA CASAREGIS 22/1,16129 Genova (GE),ITALY
Module B certificate Number  MED406923CS/001
Date  06/12/2023 
Date   RINA (No. 0474)
    
Issued in RINA Genoa Marine on
This Certificate is valid until
December 12, 2024
December 11, 2027

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE to affix the following symbol on the equipment above identified.
0474 /YY
YY Last two digits of year mark affixed
USCG Approval marking
The manufacturer is allowed to affix the U.S. Coast Guard approval number (USCG approval number:
164.106/EC0474/MED207524GE/010 to the above equipment, as allowed by the 'Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Conformity for Marine Equipment' signed February 27th, 2004.

________________________________________
Emiliano Deghenghi
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No. MED207524GE/010
Equipment:
RESISIRN A
Technical documentation

____________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules
e) RINA may revoke the approval in the case of modifications to requirements or conditions for the approval
f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply.
g) This certificate loses its validity in case the EC type Examination (Module B) certificate is no more valid.
__________________________________
Emiliano Deghenghi

**** NOTICE: This is NOT an official certificate ****