MED416425CSENGB- -  -  N- FIRE DAMPER CF -N- S- S- -10/09/2025- Marine Equipment- - SN- S- - N-  - 1,104,062B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED416425CS- N-Sep 9, 20301104062
 
Form
  Marine Equipment(TO)
MED416425CS
Certification N. MED416425CS - (ENG)
Certificate date 10/09/2025
Type Protezione antincendio
Product Sbarramenti antincendio
Item Nº MED/3.22
USCG Category N° 164.139

Model
Items/Sizes
FIRE DAMPER CF
Applicant Jiangsu Fengyuan Ship Engineering Co., Ltd.
Place of requester Daiwang Road, Chengdong Industrial Park Taixing (Jiangsu)  % CHINA
Tel. N.,Fax, Email 86+0532-87320023, 86+0523-87558658, xc813028@163.com
Directive (EU) 2024/1975
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1655
Request 09/09/2025
Validity 09/09/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED416425CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.22
USCG Category Nº 164.139
Description Fire dampers
Type FIRE DAMPER CF
Applicant Jiangsu Fengyuan Ship Engineering Co., Ltd.
Daiwang Road, Chengdong Industrial Park Taixing (Jiangsu),CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1655
Issued in Genoa on
This Certificate is valid until
September 10, 2025
September 9, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED416425CS
Page 1 of 4

Product description

Round and rectangular fire dampers fixed to the coaming, welded to a deck and to a bulkhead, by a flange with M8 mm diameter steel bolts and 20 mm thick ceramic fiber was padded. The fire dumper frame is composed of steel plate whereas the blades are composed of an hollow profile made by a carbon steel plate on both sides; the blades are filled with ceramic fiber with a density of 96 kg/m3 (certified non-combustible in compliance with IMO FTP Code). The dumpers named CF and CFD are fitted with a set of manual actuator; the dumpers named CFE and CFED are fitted with a set of electric actuator; the dumpers named CFP and CFPD are fitted with a set of pneumatic actuator. See following table for details.
The coaming, the damper installed on the bulkhead (including the actuator) are insulated with two layers of ceramic fiber having density of 96 kg/m3 and thickness of 20 mm, (certified non-combustible in compliance with IMO FTP Code); the coaming, the dumper installed on the deck (including the actuator) are installed with three layers of ceramic fiber having density of 96 kg/m3 and thickness of 20 mm, (certified non-combustible in compliance with IMO FTP Code). The ceramic fiber, fixed by means of steel pins and washers, is applied up to 50 mm away from the unexposed side end of the coaming.
Field of application
Fire resistant A-15 Class fire dampers fitted on decks and bulkheads as per the following table:

DECK
Item
Max Dim. mm
Max
Vent. Size
mm
Frame -
Flange thick mm
Blade height
mm
Blade Composition
mm
Actuator
Type
CFD DN400
D: 500
D: 400
5 - 5 mm
161-166
5+23+2
Manual
BULKHEAD
Item
Max Dim. mm
Max
Vent. Size
mm
Frame -
Flange thick mm
Blade height
mm
Blade Composition
mm
Actuator
Type
CFE DN400
D:500
D:400
5 - 5 mm
394
5+23+2
Electric












ATTACHMENT TO
CERTIFICATE Nr. MED416425CS
Page 2 of 4

Fire resistant A-30 Class fire dampers fitted on decks and bulkheads as per the following table:

DECK
Item
Max Dim. mm
Max
Vent. Size
mm
Frame -
Flange thick mm
Blade height
mm
Blade Composition
mm
Actuator
Type
CF 250x120
330x200
250x120
4 - 4 mm
117
1+22+1
Manual
CFE 250x480
330x560
250x480
5 - 5 mm
240
1+22+1
Electric
CFP 250x1120
350x1200
250x1120
6 - 6 mm
240
1+22+1
Pneumatic
CFED 300x930
380x1100
300x930
6 - 6 mm
150
1+22+1
Electric
CFD 1650x1600
1750x1700
1650x1600
8 - 8 mm
177-197
1+22+1
Manual
CFPD DN1600
D:1760
D:1600
12 - 12 mm
223-219
5+23+2
Pneumatic
BULKHEAD
Item
Max Dim. mm
Max
Vent. Size
mm
Frame -
Flange thick mm
Blade height
mm
Blade Composition
mm
Actuator
Type
CF 250x120
330x200
250x120
4 - 4 mm
117
1+22+1
Manual
CFD 200x650
730x280
650x200
6 - 6 mm
197
1+22+1
Manual
CFPD 1650x1200
1750x1300
1650x1200
8 - 8 mm
182-202
1+22+1
Pneumatic
CFED DN600
D:700
D:600
8 - 8 mm
227-232
5+23+2
Electric
Fire resistant A-60 Class fire dampers fitted on decks and bulkheads as per the following table:

DECK
Item
Max Dim. mm
Max
Vent. Size
mm
Frame -
Flange thick mm
Blade height
mm
Blade Composition
mm
Actuator
Type
CFPD 1650x1200
1750x1300
1650x1200
8 - 8 mm
182-202
1+22+1
Pneumatic
CF DN200
D:280
D:200
4 - 4 mm
194
5+23+2
Manual
CFE DN400
D:500
D:400
5 - 5 mm
394
5+23+2
Electric
CFP DN450
D:550
D:450
6 - 6 mm
444
5+23+2
Pneumatic
CFED DN800
D:900
D:800
8 - 8 mm
195-200
5+23+2
Electric








 



ATTACHMENT TO
CERTIFICATE Nr. MED416425CS
Page 3 of 4
BULKHEAD
Item
Max Dim. mm
Max
Vent. Size
mm
Frame -
Flange thick mm
Blade height
mm
Blade Composition
mm
Actuator
Type
CFE 250x480
330x560
250x480
5 - 5 mm
240
1+22+1
Electric
CFP 250x1120
350x1200
250x1120
6 - 6 mm
240
1+22+1
Pneumatic
CFED 300x930
380x1010
300x930
6 - 6 mm
150
1+22+1
Electric
CF DN200
D:280
D:200
4 - 4 mm
194
5+23+2
Manual
CFD DN400
D:500
D:400
5 - 5 mm
161-166
5+23+2
Manual
CFP DN450
D:550
D:450
6 - 6 mm
444
5+23+2
Pneumatic
CFPD DN800
D:900
D:800
8 - 8 mm
195-200
5+23+2
Pneumatic

Reference documents
Drawings enclosed to FEFTC, Far East Fire Testing Centre, Report No. FT19013 dated 25 February 2019, Report No. FT19014 dated 25 February 2019, Report No. FT19015 dated 12 March 2019, Report No. FT19016 dated 3 March 2019, Report No. FT19017 dated 14 March 2019, Report No. FT19018 dated 25 February 2019,
Tests carried out
Tests as per FEFTC, Far East Fire Testing Centre, Report No. FT19013 dated 25 February 2019, Report No. FT19014 dated 25 February 2019, Report No. FT19015 dated 12 March 2019, Report No. FT19016 dated 3 March 2019, Report No. FT19017 dated 14 March 2019, Report No. FT19018 dated 25 February 2019, according to IMO 2010 FTP Code Part. 3 - Annex 1.




ATTACHMENT TO
CERTIFICATE No. MED416425CS
Pages 4 of 4
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****