The hose assembly consists of:
Flexible hose manufactured by PARKER HANNIFIN MANUFACTURING SRL, VIA G.B. PIRELLI 6,
22070 VENIANO (CO), type H29, designed according to standard EN 856-4SH (RINA type approval certificates MAC086814CS/005, MAC086814CS/006 and MAC256919CS/002), composed by :
|
| Synthetic rubber, oil resistant |
|
| Four spirals of high tensile steel wire, separated by a synthetic rubber layer |
|
| Synthetic rubber, resistant to oils and weathering |
|
| Parker V4 series |
provided with:
- stainless steel (AISI 304) protective braid.
REFERENCE DOCUMENTS
Parker Hannifin Catalogue No. 4400.
MONTI & BARABINO drawing approved with no. PPVT-19714 on 18/12/2014.
Page 4/8 of MONTI & BARABINO booklet approved with no. MAC-10263 on 22/10/2004.
Test reports nos. 583/04, 584/04 and 629/04 dated 01/07/2004 of LAPI Laboratory.
 | ATTACHMENT TO
CERTIFICATE No. MED543424CS/001
Page 2 of 3 |
Intended for petroleum base hydraulic fluids, lubrication oil, fresh water and compressed air.
Temperatures range: -40 °C / +100 °C, according to EN 856.
Maximum working pressure according to the following table:
ND
mm | Maximum working pressure
N/mm2 |
20 | 42,0 |
25 | 38,0 |
32 | 32,5 |
38 | 29,0 |
50 | 25,0 |
TESTS CARRIED OUT
Tests carried out by LAPI Laboratorio Prevenzione Incendi SRL, Via della Quercia 11, Loc. Le Querce, PRATO,
according to ISO 15540 and ISO 15541, as per Test Reports nos. 583/04, 584/04 and 629/04 dated 01/07/2004.