Single leaf hinged door whose maximum clear opening size is 617 mm wide, 1820 mm high and having radiused corners with radius of 100 mm. The door leaf, having maximum dimension of 721 mm in width, 1920 mm in height and thickness of 99 mm, is composed of a steel plate 5 mm thick having the edges bended on the rabbet and of a steel sheet 2 mm thick, fitted on the side opposite to the opening. Between the two sheets an insulating material compound is fitted. The insulation material compound is composed, moving from the side not exposed to the fire, of a layer of mineral wool covered on one side with an aluminium foil type ROCKWOOL MARINE FIREBATTS 100 having thickness of 40 mm and density of 100 kg/m3 glued, by means of adhesive type Sika Firestop Marine, 2 mm thick, to a steel sheet having thickness of 2 mm, one layer of material type PROMAGUARD ALU 6 mm thick and having density of 240 kg/m3, a cavity for the lever closing device movement and one layer of PROMAGUARD ALU. The PROMAGUARD ALU layers are fixed to the steel sheets by means of steel pins; a further layer having width of 120 mm is fitted on the joints. Inside the leaf āUā shaped steel stiffeners, having dimensions of 42x65 mm and thickness of 6 mm, are welded to steel plate, 5 mm thick, on the perimeter (one stiffener) and in transversal position (two stiffeners). Two additional longitudinal plate stiffeners, 2 mm thick and having dimensions of 40x10 mm are fitted, in the middle, between the transversal and perimeter stiffeners. The door frame is composed of a carbon steel angular having dimensions of 102x46 and thickness of 6 mm bolted to the bulkhead by means of M8 bolts having pitch of 64 mm and is insulated with two layers of the same mineral wool having width of 100 mm and thickness of 60 and 40 mm. The frame makes the closure tight with the gasket fitted in the leaf bended edges with an L shaped steel profile having the same thickness and dimensions of 31x24 mm welded to the frame at a distance of 42 mm from the frame bended edge. The door is equipped with a lever closing device that acts on 10 points fitted inside the leaf and actuated by an handwheel.
|
ATTACHMENT TO
CERTIFICATE Nr. MED164422CS
Page 2 of 3 |
Field of application
Fire resistant A-60 Class single leaf hinged watertight (maximum hydrostatic head 0.3 bar applied on both faces) door in compliance with IMO MSC.1/Circ. 1273 dated 30 May 2008. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
Reference documents
Bofor drawings No. 01 rev. 1 dated 12 January 2012 approved on 30 March 2012 with endorsement No. LABS-652.
Tests carried out
Test as per RINA Test Laboratory Report No. 2011CS013865 issued on 6 April 2012 according to IMO Res. A. 754(18) and to IMO MSC.1/Circ. 1319 dated 11 June 2009. RINA Turkey Test Report No. 08-XT-708-01 dated 22 April 2009. |