Product information:
Product:
Fire detection and fire alarm system type CAL10252.
Product description:
The CAL10252 and CAL10252/N control panels are designed to provide visual and audible indication of a fire alarm or a system fault condition, and to allow the management of the related alarms. The control panels allow the supervision of 8 independent zones, each consisting of a maximum of 4 detectors.
Main features:
The control panels indicate the following operating conditions:
- standby
- fire alarm
- fault/out of service
- test.
All indications are provided through LED lights and a piezoelectric buzzer on the front panel.
8 LED red color for Zone alarm (max 4 fire detectors for each loop)
1 LED yellow color for Failure alarms:
· power supply failure,
· insulation failure,
· electronic failure,
· loop short circuit and loop disconnection.
Fire alarm output (two minutes delay) according to SOLAS Requirements
Main power supply: 24Vdc
Emergency power supply: 24Vdc
Reference documents:
Technical Manual / User’s instructions: M991119 rev.5 (14/03/2013)
Reference drawings:
D990928 | Wiring diagram of the type approved fire and smoke alarm control unit (CAL10252) | (19/03/2004) |
D050718 | Wiring diagram of the type approved fire and smoke alarm control unit (CAL10252/N) | (14/07/2005) |
D991014 | Type approved fire detection control panel CAL10252 | (23/11/1999) |
D991121 | Wiring diagram of type approved smoke/fire detector | (22/03/2004) |
Test reports:
TesLab report n. 24B356F (31/01/2025).