MED332522CSENGF- -  -  N-  J1 LUX - J2 LUX - J1 AS+ - J1 ASR -N- S- S- -29/03/2023- Marine Equipment- - SN- S- - N-  - 1,105,596B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED332522CS- N-Mar 28, 20281105596
 
Form
  Marine Equipment(TO)
MED040124MI/001,MED040124MI/002,MED040124MI/003,MED080725MI/001,MED005426MI/001,
MED005426MI/002,MED005426MI/003
Certification N. MED332522CS - (ENG)
Certificate date 29/03/2023
Type Protezione antincendio
Product Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Item Nº MED/3.15c

Model or Denomin.
Items
J1 LUX - J2 LUX - J1 AS+ - J1 ASR
Applicant ISOPREN S.r.l.
Place of requester VIA A. MERLI 6  %  20095 Cusano Milanino (MI)  % ITALY
Tel. N.,Fax, Email ---, ---, paolo.casali@isopren.it
Directive (EU) 2022/1157
Standards EN ISO 15540 (2001), EN ISO 15541 (2001)
Reference Documents Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Request 12/02/2021
Expire date 28/03/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Rosario Pitruzzo S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED332522CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.15c
Description Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Type J1 LUX - J2 LUX - J1 AS+ - J1 ASR
Applicant ISOPREN S.r.l.
VIA A. MERLI 6,20095 Cusano Milanino (MI),ITALY
Testing standards EN ISO 15540 (2001), EN ISO 15541 (2001)
Reference standards Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Issued in Genoa on
This Certificate is valid until
March 29, 2023
March 28, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Rosario Pitruzzo
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED332522CS
Page 1 of 2
MATERIALS/COMPONENTS/TECHNICAL DATA
Non metallic expansion joints
Diameters:
J1 LUX: DN40 - DN50 - DN65 - DN80 - DN100 - DN125 - DN150 - DN175 - DN200 - DN250;
J2 LUX: DN40 - DN50 - DN65 - DN80 - DN100 - DN125 - DN150 - DN200 - DN250;
J1 AS+: DN40 - DN50 - DN65 - DN80 - DN100 - DN125 - DN150 - DN175 - DN200 - DN250;
J1 ASR: DN32 - DN40 - DN50 - DN65 - DN80 - DN100 - DN125 - DN150 - DN175 - DN200 - DN250;

Working pressure: 16 bar;
Working temperature: min -10°C, +90°C with peaks to +100°C;
Expantion joints material:
  • Internal POLSPP, POGNTH, POLGNT, EPD174 and FK 70;
  • External POLGNT, POGNTH, GS1123.
Flange: Steel - Stainless Steel AISI 316.

REFERENCE DOCUMENTS

Letter No. PPVT/2021/210/CAA

PPVT-35753Fascicolo Compensatori T200120 - T200121 -
T201009
PPVT-35754Cuffia anti fiamma - FR LUX
PPVT-35755Analisi dei rischi
Letter PPVT/2022/1011/CRLVA
PPVT-39886 Fascicolo tecnico Serie ASR


TEST CARRIED OUT
Fire tests ISO 15540:2016 and ISO 15541:2016, dated 07/01/2021
reports no. 2020CS012534/001-002-003-004-005-006-007-008
RINA Laboratory - Calata Gadda Genova

Additional burst test and Fire resistance test on ASR series filed with dwg PPVT-41103 , Letter PPVT/2023/275/CRLVA





ATTACHMENT TO
CERTIFICATE No. MED332522CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Rosario Pitruzzo
**** NOTICE: This is NOT an official certificate ****